Boot (Trunk) Mat suitable for Toyota Celica A20 Series Flat Light

Boot (trunk) carpet mat for your first generation Toyota Celica A20 'flat light' with rear fuel cap.

Suited to all coupe Toyota Celica built between 1971 to 1972 known as 'flat light' or 'one tail' our boot mat is styled off the OEM factory original mat, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

This boot mat does not suit the liftback variants of the A20 series Toyota Celica or those with a side mounted fuel cap.

Displayed here in Black loop pile with a black edge binding, these mats provide a look that has an OEM look and period correct feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'first gen' Toyota Celica project in style - whether its a daily driver, resto-mod or detailed restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

View the embedded image gallery online at:
https://www.koromoheritage.com/latest-products#sigProIdd02e548dfb

View the embedded image gallery online at:
https://www.koromoheritage.com/latest-products#sigProId839cc6928a

$170.00
* Carpet Colour:

* Carpet Pile:

* Edge Binding Colour:

Cargo Area Mat Set suitable for Toyota Celica ZZT230

Cargo area carpet mat for your seventh generation T230 series Toyota Celica.

Suited to all Toyota Celica ZZT230 and ZZT231 built between 1999 to 2006 our cargo area carpet mats are styled off the OEM factory original mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'seventh gen' Toyota Celica project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

View the embedded image gallery online at:
https://www.koromoheritage.com/latest-products#sigProIdc40fa96c7c

View the embedded image gallery online at:
https://www.koromoheritage.com/latest-products#sigProIdc92d918025

$165.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Manifold suitable for Toyota 18RG Engine with 2 x 45DCOE Weber (2)

Upgrade your engine performance with this side draft manifold suitable for Toyota 18RG twin cam engines, including 18RG, 18R-GU and 18R-GEU Engines

This genuine Redline intake manifold is designed to fit two DCOE Weber Carbs (45DCOE) and will the following models:

Toyota Celica GT

  • RA23, RA25, RA28
  • RA40, RA45, RA55
  • RA63

Toyota Carina GT

  • RA15, RA17, RA30
  • RA40, RA45, RA55
  • RA63

Toyota Corona GT

  • RT132
  • RT141

Toyota Camry Celica GT

  • RA55

These Australian made high quality manifolds are made using highly developed casting and precision tooling. Made to match original specifications for mounting these will complete any project and add performance.

Koromo Heritage is also able to supply ancilliary items for fitments such as studs, gaskets and spacers as well as carburettors and airfilter assemblies - please email This email address is being protected from spambots. You need JavaScript enabled to view it. to enquire.

Shipping worldwide every week - so no problems for international buyers.

$380.00

Manifold suitable for Toyota 18R 8R Engine with 2 x 40DCN Weber

Upgrade your engine performance with this down draft manifold suitable for Toyota 18R and 8R engines.

This genuine Redline intake manifold is designed to fit two twin DCN Weber Carbs (40DCN) and will the following models:

Toyota Corona

  • 8R engine - RT83 RT93 
  • 18R engine - RT85, RT95, RT89V, RT104, RT114, RT118, RT122

Toyota Mark ii (including Corona Mark ii)

  • 8R engine - RT62 (not DOHC), RT63, RT73, RT78, RT79, RX12, RX22, RX28 
  • 18R engine - RT85, RT95, RT89V, RT104, RT114, RT118, RT122

Toyota Hilux

  • 8R engine - RN10 & RN15 (USA only) 
  • 18R engine - RN10 & RN15 (USA only), RN22, RN27, RN30, RN40

These Australian made high quality manifolds are made using highly developed casting and precision tooling. Made to match original specifications for mounting these will complete any project and add performance.

Koromo Heritage is also able to supply ancilliary items for fitments such as studs, gaskets and spacers as well as carburettors and airfilter assemblies - please email This email address is being protected from spambots. You need JavaScript enabled to view it. to enquire.

Shipping worldwide every week - so no problems for international buyers.

$675.45

Carpet Floor Mat Set suitable for Toyota Corolla E120 Series

Capet floor mat set for your ninth generation E120 Toyota Corolla Liftback. 

Suited specifically to the Toyota Corolla liftback ZZE122R this carpet floor mat set has been patterened off original OEM factory mats and is made in Australia to the highest quality.

Available in fourteen different colours and two piles (plush or loop) - use the drop down menus to select. 

You can also customise your mat set by selecting the edge binding colour by using the additional drop down menu.

Complete your Toyota Corolla Liftback in style with this set of carpet floor mats from Koromo Heritage.

Shipping worldwide weekly - no problems for overseas buyers.

View the embedded image gallery online at:
https://www.koromoheritage.com/latest-products#sigProIdc40fa96c7c

View the embedded image gallery online at:
https://www.koromoheritage.com/latest-products#sigProIdc92d918025

 

$150.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Floor Mat Set suitable for Toyota Crown S110 Series

Front and rear floor carpet set for your S110 series sixth generation Toyota Crown.

Suited to all RHD Toyota Crown S110 series such as RS110, GS110, MS110, MS111, MS112, LS110 and LS117V built between 1979 to 1983 our carpet floor mats are patterened off OEM floor mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats included in the set and this includes the two front foot well mats and the two rear floor well mats. 

Displayed here in classic 1980's blue plush pile (first pic) and ginger loop pile with brown edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

You can also select your edge binding colour - please also use the drop down menu to select your colour of choice.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'sixth gen' Toyota Crown S110 series project in style - whether its a daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

View the embedded image gallery online at:
https://www.koromoheritage.com/latest-products#sigProIdd02e548dfb

View the embedded image gallery online at:
https://www.koromoheritage.com/latest-products#sigProId839cc6928a

$150.00
* Carpet Colour:

* Carpet Pile:

* Edge Binding Colour:

Moulded Carpet suitable for Toyota Corolla E20 series Wagon

Front and rear moulded floor carpet suitable for your Toyota Corolla E20 series wagon. 

Suited to all Toyota Corolla wagons built between 1970 to 1978 our moulded carpets are well fitting and made in Australia to the highest quality and are complete with heel mat and leading edge trimmed.

This moulded carpet fits all three and five door wagon variants such as KE26 KE26V, TE26 and TE28.

Avialable in Right Hand Drive (RHD) and Left Hand Drive (LHD) - simply use the drop down menu to select.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'second gen' Toyota Corolla wagon project in style and with added comfort - whether its a retro-ride, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

View the embedded image gallery online at:
https://www.koromoheritage.com/latest-products#sigProIdc40fa96c7c

 

$240.00
* Carpet Colour:

* Driver Side:

Mudguard (Fender) Badge suitable for Toyota Stout 1900 RK100 RK41

Reproduction mudguard (fender) badge suitable for Stout 1900

Complete your old school Stout truck in style with a pair of these wonderful badges.

These mudguard (aka fender) badges were used on the RK100 and RK41 variants throughout many years starting as early as 1963.

Our Australian made high quality reproductions are made using precision tooling. Faithful to original specifications these will complete any project with the nicest finishing touch.

Complete your 'classic' Stout project in style - whether its a retro-ride, daily driver, restoration project, work horse or even a shop truck!

Shipping worldwide every week - so no problems for international buyers.

$140.00
Out of stock