Front and rear floor carpet set for your S110 series sixth generation Toyota Crown.

Suited to all RHD Toyota Crown S110 series such as RS110, GS110, MS110, MS111, MS112, LS110 and LS117V built between 1979 to 1983 our carpet floor mats are patterened off OEM floor mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats included in the set and this includes the two front foot well mats and the two rear floor well mats. 

Displayed here in classic 1980's blue plush pile (first pic) and ginger loop pile with brown edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

You can also select your edge binding colour - please also use the drop down menu to select your colour of choice.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'sixth gen' Toyota Crown S110 series project in style - whether its a daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Edge binding colours Edge binding colours
• 
•  

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Front and rear moulded floor carpet suitable for your Toyota Corolla E20 series wagon. 

Suited to all Toyota Corolla wagons built between 1970 to 1978 our moulded carpets are well fitting and made in Australia to the highest quality and are complete with heel mat and leading edge trimmed.

This moulded carpet fits all three and five door wagon variants such as KE26 KE26V, TE26 and TE28.

Avialable in Right Hand Drive (RHD) and Left Hand Drive (LHD) - simply use the drop down menu to select.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'second gen' Toyota Corolla wagon project in style and with added comfort - whether its a retro-ride, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Reproduction mudguard (fender) badge suitable for Stout 1900

Complete your old school Stout truck in style with a pair of these wonderful badges.

These mudguard (aka fender) badges were used on the RK100 and RK41 variants throughout many years starting as early as 1963.

Our Australian made high quality reproductions are made using precision tooling. Faithful to original specifications these will complete any project with the nicest finishing touch.

Complete your 'classic' Stout project in style - whether its a retro-ride, daily driver, restoration project, work horse or even a shop truck!

Shipping worldwide every week - so no problems for international buyers.

Reproduction mudguard (fender) badge suitable for Toyota Lite Stout

Complete your old school Stout truck in style with a pair of these wonderful badges.

These mudguard (aka fender) badges were used on the RK40 and RK45 variants throughout many years starting as early as 1963.

Our Australian made high quality reproductions are made using precision tooling. Faithful to original specifications these will complete any project with the nicest finishing touch.

Complete your 'classic' Stout project in style - whether its a retro-ride, daily driver, restoration project, work horse or even a shop truck!

Shipping worldwide every week - so no problems for international buyers.

Genuine Eagle brand 7mm ignition leads to suit your AE82 Toyota Corolla built from 1988 to 1989.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the  AE82 Toyota Celica

Suits 1.6L 4A-GEL DOHC 16V Fuel Injection models of the AE82 Toyota Corolla.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 5mm Leads to suit your AE82 Toyota Corolla built from 1983 to 1988 as sold in New Zealand

Our photo shows each of the boot and tube assemblies specific to this kit that suits the AE82 Toyota Corolla.

Suits 1.6L 4A-GEL DOHC Fuel Injection models of the AE82 Toyota Corolla.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 5mm Leads to suit your AE86 Toyota Corolla Sprinter built from 1983 to 1987

Our photo shows each of the boot and tube assemblies specific to this kit that suits the AE86 Toyota Corolla Sprinter.

Suits 1.6L 4A-GE 16V DOHC Fuel Injection models of the AE86 Toyota Corolla Sprinter.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 5mm Leads to suit your AE92 Toyota Corolla built from 1987 to 1992 as sold in New Zealand

Our photo shows each of the boot and tube assemblies specific to this kit that suits the AE92 Toyota Celica

Suits 1.6L 4A-GE DOHC Fuel Injection models of the AE92 Toyota Corolla.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.