Spare parts suitable for Toyota Camry V20 Series

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

• CV10, CV11, SV10, SV11, SV12
• MCV20, MCV21, SXV20, SXV23, SXV25
• MCV36, ACV36
• ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

• TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
• AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
• AT160, ST160, ST161, ST162, ST163, ST165
• AT180, ST182, ST183, ST184, ST185
• AT200, ST202, ST203, ST204, ST205
• ZZT230 and ZZT231 

Toyota Corona

• RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
• RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
• AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
• T160, T170, T190 series
• T200, T210, T220 series

Toyota Cressida

• RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
• X60, X70 and X80 series

Toyota Carina

• A10, A40, A60 series
• T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

• KE30, KE35, KE38, KE55, TE55, TE37
• KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
•  AE80, EE80, AE81 AE85, AE82, AE86, CE80
• AE90, AE92, AE93, AE94, AE95, AE96
• AE101, AE111, AE112
• ZRE120
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

• RN10, RN15
• RN20, RN25
• RN30, RN35, RN40, RN45
• RN50, RN60, YN60, LN60, RN70, YN70, LN70
• N80, N90, N100, N110 series
• N120 series
• N130 series
• N140 series

Toyota Land Cruiser 

• FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
• FJ55, FJ55G, FJ55V, FJ56
• FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
• FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
• HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

• J90, J120 and J150 series

Toyota Starlet

• KP60, KP61, KP62
• P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Front and rear moulded floor carpet for your second generation V20 series Toyota Camry.

Suited to all Toyota Camry built between 1986 to 1992 including SV20, CV20, SV21, SV22, SV23, SV25, VZV20 and VZV21 our moulded carpets are well fitting and made in Australia to the highest quality and replaces OEM carpets nicely.

These carpets also fit Holden Apollo JK and JL models as well as Lexus ES250 from 1989 to 1991.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

Can be selected as RHD or LHD also using the drop down menus.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'second gen' Toyota Camry project in style - whether its a retro-ride, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Genuine Eagle brand 7mm ignition leads to suit your SV21 Toyota Camry.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the SV21 Toyota Camry.

Suits 2.0L 3S-GE DOHC 16V Fuel Injection models of the SV21 Toyota Camry.

NOTE: these models were not delivered to the Australian market but you may own a private import. These models were mostly delivered domestically in Japan plus other foreign markets such as New Zealand, Belgium and the Middle East. 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.