Spare parts suitable for Toyota Corolla

Toyota scrivet mounting clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina, Hilux, Soarer and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 11mm stem length and fit to a 10mm hole are a plastic push in trim clips used to fasten door trim cards, boot lining panels, console trims, rear door trims, tailgate trims, pillar trim, roof lining edge trims.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

• SW20 and SW21

 Toyota Corolla

• AE91, AE92, AE95, CE90 and EE90

Toyota Caldina

• AT191, CT190, ST190, ST191 and ST195

Toyota Carina

• AT190, AT191, CT190 and ST191

Toyota Corona

• ST191

Toyota Hilux

• LN50, LN51, LN55, LN56, RN55, YN51, YN56
• LN60, LN61, LN65, RN61, RN66, YN60, YN61G, YN61V, YN65
• LN80, LN81, LN85, LN86, RN80, RN85, VZN85, YN80, YN81, YN85, YN86, YN87
• LN90, LN91, RN90, VZN90, VZN95, YN90, YN92
• LN100, LN105, LN106, LN107, RN101, RN105, RN106, VZN100, VZN105, YN100, YN106
• LN110, LN111, RN110, VZN110, YN110
• LN200, LN205 and RZN200

Toyota Soarer 

• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Genuine Eagle brand 5mm Leads to suit your AE92 Toyota Corolla built from 1987 to 1992 as sold in New Zealand

Our photo shows each of the boot and tube assemblies specific to this kit that suits the AE92 Toyota Celica

Suits 1.6L 4A-GE DOHC Fuel Injection models of the AE92 Toyota Corolla.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

• CV10, CV11, SV10, SV11, SV12
• MCV20, MCV21, SXV20, SXV23, SXV25
• MCV36, ACV36
• ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

• TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
• AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
• AT160, ST160, ST161, ST162, ST163, ST165
• AT180, ST182, ST183, ST184, ST185
• AT200, ST202, ST203, ST204, ST205
• ZZT230 and ZZT231 

Toyota Corona

• RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
• RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
• AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
• T160, T170, T190 series
• T200, T210, T220 series

Toyota Cressida

• RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
• X60, X70 and X80 series

Toyota Carina

• A10, A40, A60 series
• T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

• KE30, KE35, KE38, KE55, TE55, TE37
• KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
•  AE80, EE80, AE81 AE85, AE82, AE86, CE80
• AE90, AE92, AE93, AE94, AE95, AE96
• AE101, AE111, AE112
• ZRE120
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

• RN10, RN15
• RN20, RN25
• RN30, RN35, RN40, RN45
• RN50, RN60, YN60, LN60, RN70, YN70, LN70
• N80, N90, N100, N110 series
• N120 series
• N130 series
• N140 series

Toyota Land Cruiser 

• FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
• FJ55, FJ55G, FJ55V, FJ56
• FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
• FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
• HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

• J90, J120 and J150 series

Toyota Starlet

• KP60, KP61, KP62
• P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota door card interior trim clip pack to suit various Toyota models - Corolla, Carina, Corona, Cressida, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 8.5mm hole are a plastic push in trim clips used to fasten door cards, trim panels, door pillars, boot linings and pillars etc.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

• SW20 and SW21

 Toyota Corolla

• AE101
• AE91, AE92, AE95, CE90, CE96, CE97, EE90, EE96, EE97 and EE98

Toyota Carina

• AT171, CT170, CT176, ET176, ST171
• AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Corona

• AT170, AT171, AT175, CT170, ST170, ST171
• AT210, AT211, AT220, CT210, CT211, CT215, CT216, CT220, ST210, ST215 and ST220

Toyota Cressida

• GX81, LX80, MX81, MX83, RX80 and RX81

Toyota Land Cruiser 

• BJ73, FJ70, FJ73, HZJ70, HZJ73, HZJ77, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ77, RJ70, RJ73, RJ77
• FJ80, FZJ80, HDJ80, HDJ81, HZJ80 and HZJ81

Toyota Prado

• KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Inner guard (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Camry, MR2, Carina, Caldina

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
• ST160, ST162, AT160, ST163, ST164 and ST165
• ST180, ST184 and ST185
• ST200, ST202, ST203, ST204 and ST205

 Toyota MR2

• AW10 and AW11
• SW20 and SW21
• ZZW30

Toyota GR Four Yaris

• GXPA16

Toyota Corolla

• AE81, AE82, AE85 and AE86
• AE90, AE92, AE93, AE94, AE95 and AE96
• AE101, AE102 and AE112 

 Toyota Camry

• SV10, SV11, SV12, CV10 and CV11
• SV20, SV21 and SV22

Toyota Caldina 

• ST191, ST195 and ST198

 Toyota Carina

• TA40, TA41, TA42, TA47, TA57, RA40, RA45, RA46, RA55 and RA56
• AA60, KA67V, AA63, TA60, TA61, TA67V, TA62, TA63, RA63, CA60 and CA67V
• ST162
• ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V
• AT192, AT190, AT191, ST190, ST195, CT190 and CT195
• AAT212, AT210, AT211, ST210, ST215, CT210, CT215, CT211 and CT216

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Front and rear moulded floor carpet for your sixth generation E90 series Toyota Corolla.

Suited to all RHD FWD Toyota Corolla E90 series built between 1987 to 1992 including EE90, AE92, AE93, AE94, CE90, AE91G, CE97G, CE96V, EE96V, EE97G and EE98V our moulded carpets are well fitting and made in Australia to the highest quality and replaces OEM carpets nicely.

NOTE: these carpets do not suit RWD variants AE91 or AWD variants AE95, AE95G or CE95.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'sixth gen' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Door card, side trim panel and fascia fastener clip pack to suit various Toyota models - Caldina, Celica, Corolla, Corona, Supra, MR2, Soarer, Prado, Yaris, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door as well as other interior trim and fascia panels.

These are a push in clip that have a fit to a 9mm hole size and measure 12.8mm ( top head diameter), 15.6mm (centre head diameter) , 17.7mm (bottom head diameter) with a stem length of 14.2mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Caldina

• AT191, CT190, CT196, CT197, CT198, CT199, CT216, ET196, ST190, ST191, ST195, ST198
• AT211, ST210, ST215

 Toyota Celica 

• ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

• AE91, AE92, AE95, CE90, EE90
• AE100, AE101, AE102, AE103, AE104, CE100, CE101, CE104, EE100, EE101
• AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
• CDE120, ZRE120, ZZE120, ZZE121, ZZE122 and ZZE123

 Toyota Corona

• YT140

 Toyota Hilux

• KDN145, LN140, LN141, LN145, LN147, RZN142, RZN144, RZN147, RZN148, RZN149
• KDN150, KDN151, LN150, LN152,
• KDN165, KDN166, KZN165, LN166, LN167
• KDN170, LN170, LN171, LN172, RZN173, RZN174, VZN172
• KDN190, KZN190, LN192 and RZN194

  Toyota Supra

• MA61, MA63

Toyota Land Cruiser 

• BJ60, FJ62, HJ60
• BJ73, FJ70, FJ73, FJ75, FZJ70, FZJ71, FZJ73, FZJ74, FZJ75, FZJ78, FZJ79, HDJ78, HDJ79, HJ75, HZJ70, HZJ71, HZJ73, HZJ74, HZJ75, HZJ76, HZJ77, HZJ78, HZJ79, KZJ70, KZJ71, KZJ73, KZJ77, KZJ78, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ75, PZJ77, RJ70, RJ73, RJ77
• FJ80, FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
• FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

• KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota MR2 

• SW20 and SW21

Toyota Soarer

• JZZ30, UZZ30, UZZ31 and UZZ32

Toyota Supra

• JZA80

Toyota Yaris 

• NCP10, NCP11, NCP12, NCP13, NLP10, SCP10
• NCP20
• EP80, EP81, EP82, EP85, NP80
• EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota exterior moulding clip pack to suit various Toyota models - Corolla, Carina, Corona, Hilux, Surf, Land Cruiser, MR2, Starlet and Supra

These clips have a 7mm square head and rubber washer and are plastic push in trim clips used to fasten side mouldings, vents, grillesand various other exterior trim items.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

• GA70, JZA70 and MA70

Toyota MR2

• ZZW30

Toyota Corolla

• AE80, AE81, AE82, CE80, EE80
• AE91, AE92, CE90, CE96, CE97, EE90, EE96, EE97, EE98
• AE100, AE101, AE102, CE100, CE106, CE108, CE109, EE100, EE101, EE105, EE106, EE107 and EE108

Toyota Carina

• TA60, TA62, CA60, SA60
• AT170, AT171, CT170, CT176, ET176, ST170 and ST171

Toyota Corona 

• CT147, KT147, TT147, YT140
• AT177, CT176, CT177, ET176 and ST171

Toyota Starlet

• EP70, EP71, EP76, NP70 and NP76

 Toyota Hilux / Surf

• KDN185, KZN185, RZN180, RZN185 and VZN185

Toyota Land Cruiser

• FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

 Toyota Soarer

• JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.