Spare parts suitable for Toyota Corolla and Sprinter E20 Series

This decal was applied to Toyota vehicles through out the 1970's and early 1980's, and denoted the licenced use of ASCO disc brake technology by Toyota.

Complete your Toyota Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

Reproduction valve clearance decal for Toyota models with 2T-G and 2T-GR engines.

Suits 2T-G and 2T-GR  engined models as follows:

• Toyota Celica TA22, TA40, TA45, TA60 and TA61
• Toyota Corolla TE21, TE27, TE31, TE37, TE51 and TE71
• Toyota Carina TA12 and TA17

These decals were fitted to the air plenum from the factory and provided instructions for valve clearances and other data such as air filter element change out.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

Off the shelf and ready to go exhaust manifold flange that has been designed and engineered.

Make your own exhaust mainfold with this stainless steel flange to suit your 3K or 4K high performance Toyota engine.

This custom made flange is made from 16mm stainless steel which is perfect for post-welding milling to ensure a flat and perfect fit to the engine head.

Perfect for the owner who is making their own exhaust headers.

Suitable for race, drift, road or any application. 

Made to order part.

Worldwide shipping weekly - so no problems for overseas buyers.

Toyota Heritage recommends also looking at our listing for a complete kit (exhaust and inlet flanges) to ensure better overall fitment and improved purchase price.

All colours from 1969 to 1971 available.

Complete your early Toyota restoration project in complete style!

These AMI Lustrelife paint colour decals were fitted in the engine bay of all early model Toyota's built during 1969 to 1971. These were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Our decals are correct in every detail including artwork, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

This decal was applied to all Japanese built Toyota models throughout the late 1960's to 1980.

This included modesl such as Land Cruiser (FJ40, FJ45, FJ55 etc), Hilux (RN15, RN25 etc), Crown (MS55, MS60, MS70, MS80 etc), Celica (A20 series) and Corolla (E20 and E30 series).

Complete your classic Toyota Restoration in style with this decal that is applied to the top face of the radiator adjacent to the radiator cap.

Fitted at the very top of the radiator, this decal is most visible immediately when the bonnet (hood) is opened and provides that finishing touch to a resto.

Often the original decal may have been removed when the radiator was reconditioned, replaced or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

Complete your early Toyota restoration project with an authentic type York Motors Toyota dealership stock plate plate.

These Stock Plates were fitted in the engine bay of all early model Toyota's built during the 1960's and early 1970's. Used extensively on locally built AMI cars but also on fully imported models and this included Crown, Corolla, Sprinter, Corona, Mark ii, Tiara and Publica.

Often many cars that were sold through York Motors have lost this plate or when an owner has removed it for painting the original plate has been deformed.

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

Compliments our TEQ Build plate very nicely adding those finishing touches to the engine bay for an authentic restoration.

The pricing includes having your car's unique stock number applied to the plate before we ship it to you.

Off the shelf and ready to go inlet manifold flanges that have been designed and engineered.

Make your own inlet mainfolds with this stainless steel inlet flange kit to suit your 3K or 4K high performance Toyota engine.

This custom made inlet flange kit is made from 16mm stainless steel which is perfect for post-welding milling to ensure a flat and perfect fit to the engine head.

Perfect for the owner who is making their own ITB arrangement.

Suitable for race, drift, road or any application. 

Made to order part.

Worldwide shipping weekly - so no problems for overseas buyers.

Toyota Heritage recommends also looking at our listing for a complete kit (exhaust and inlet flanges) to ensure better overall fitment and improved purchase price.

Complete your early Toyota restoration project in style with a Genuine Parts Warning decal.

These 'Genuine Parts Warning' decals were located on the aircleaner assembly or rocker cover of all early model Toyota's built during the 1960's and early 1970's at Australian Motor Industries (AMI). These decals were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Often many cars have lost this decal over their life as past owners may removed them for painting or the decal was simply torn or lost.

The decal advises buyers that genuine parts are made with the same quality as the originals and should always be used.

Completed on an original high chrome type material and using precision fonts this decal is an exact replica of those fitted back in the day.

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

• KE10, KE11, KE15, KE16, KE17 and KE18
• KE20, KE25, TE21, TE25, TE27 and TE26
• KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
• TE72
• AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

• FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

• KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

• TA10
• KA67
• ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

• TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
• TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

• All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your early Toyota restoration project!

These seals were fitted between the inside of the door frame and the window regulator/winder mechanism of Toyota's built during the 1960's and early 1970's. We have seen these on Crown, Corolla, Corona, Mark ii and Landcruiser just to name a few models.

These stop vibration and 'wobble' of your window winder handle and help eliminate rattles.

Our reproduction part is exacting in every detail.

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and early 1970's. Generally these were used up till December 1974, but this may vary in some countries.

We have seen these on Crown, Corolla, Corona, Mark ii, Stout, Publica, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Front and rear moulded floor carpet suitable for your Toyota Corolla E20 series wagon. 

Suited to all Toyota Corolla wagons built between 1970 to 1978 our moulded carpets are well fitting and made in Australia to the highest quality and are complete with heel mat and leading edge trimmed.

This moulded carpet fits all three and five door wagon variants such as KE26 KE26V, TE26 and TE28.

Avialable in Right Hand Drive (RHD) and Left Hand Drive (LHD) - simply use the drop down menu to select.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'second gen' Toyota Corolla wagon project in style and with added comfort - whether its a retro-ride, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Genuine Eagle brand 8mm ignition leads to suit your Toyota Celica, Toyota Corona or Toyota Carina fitted with an 18RG engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 2TG engines.

Suits 2.0L 2TG DOHC GT1600 (Celica and Carina) and Levin or Trueno (Corolla) models as follows:

• Celica - TA23, TA27, TA28, TA40, TA45, TA60 and TA61
• Carina - TA12, TA17, TA40, TA45 and TA60 
• Corolla - TE21, TE27, TE28, TE37, TE51 and TE71 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Complete your early Toyota restoration project in style with a pair of reproduction lenses to suit your early style factory Toyota Motor Corp auxiliary ('driving') lights.

Replaces original Koito part number L2589.

Mostly fitted to Toyota Stout and Toyota Land Cruiser these were also fitted as factory auxiliary driving lights on Crown, Corolla, Corona, Mark ii, and Hilux just to name a few other models.

You may find that your original lense is missing or cracked. These wonderful reproduction lenses are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate for vehicles with original delivery in Japan.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and up to the year of 1970. Generally these were used up till December 1970, but this may vary on some models and for some cars sold in January 1971.

We have seen these on Crown, Corolla, Corona, Stout, Publica, and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Reproduction engine decal Toyota models with 'Cali-spec' 3K-C and 4K-C engines.

Suits the following Toyota vehicles fitted with a 3K-C or 4K-C engine:

• Toyota Corolla KE20 (North America only)
• Toyota Corolla KE30, KE35, KE38 and KE50 (Japan and Australia).
• Toyota Corolla KE70, KE72 and KE74 (Australia only)
• Toyota Starlet KP61 1981 to 1984

These decals were fitted to the top of the rocker cover from the factory to denote the installation of the mighty 3K-C or 4K-C engine.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction engine decal for Toyota models with 2T, 2T-B, 2T-C or 2T-G engines.

Suits 2T engined models as follows:

• Toyota Celica TA21, TA22
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30
• Toyota Corona TT100, TT106V, TT110 and TT120

Suits 2T-B engined models as follows:

• Toyota Celica TA28
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30

 Suits 2T-C engined models as follows:

• Toyota Celica TA21, TA22
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30

Suits 2T-G engined models as follows:

• Toyota Celica TA27 (1600GT versions)
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12 and TA17 (1600GT versions)

These decals were fitted from the factory to the cam-shaft cover or the timing chain inspection plate for twin cam versions.

Select the decal for your engine by using the drop down menu.

Our reproduction decals are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

• 2T-B engine decal 2T-B engine decal
• 2T-C engine decal 2T-C engine decal
• 2T-G engine decal 2T-G engine decal
•  

Off the shelf and ready to go manifold flange kit that has been designed and engineered.

Make your own inlet and exhaust mainfolds with Toyota Heritage's stainless steel manifold flanges to suit your 3K or 4K high performance Toyota engine.

Our manifold flanges are made from 16mm stainless steel which is perfect for post-welding milling to ensure a flat and perfect fit to the engine head.

With both flanges made in the same material and thickness this ensures ease of even fastening of the manifolds to the engine head.

Select from Full Kit (incl both inlet and exhaust) or Exhaust Flange or Inlet Flange using the drop-down menu.

Perfect for the owner who is making their own ITB arrangement and needs an exhaust header to match.

Suitable for race, drift, road or any application. 

Made to order part.

Worldwide shipping weekly - so no problems for overseas buyers.

• Exhaust flange Exhaust flange
• Full Kit Full Kit
• Inlet flange Inlet flange
•  

All colours available from 1969 to 1971.

Complete your early Toyota restoration project in complete style!

These AMI Lustrelife paint colour decals were fitted in the engine bay of all early model Toyota's built during 1969 to 1971. These were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Our decals are correct in every detail including artwork, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

• Apple
• Bronze Metallic
• Caribbean
• Cirrus Grey
• Columbine Blue
• Cornflower
• Cream
• Deep Russet
• Desert Beige
• Havana Gold
• Hayman Blue
• Marina Turquoise
• Midnight Blue
• Mocca
• Peak White
• Signal Red
• Sirius White
• Targa Pearl Metallic
• White 
• Willow

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

Reproduction valve clearance decal for Toyota models with 2K, 3K-H, 3K-C or 4K-C engines.

Suits 4K-C ('California Spec') engined models as follows:

• Toyota Corolla KE50, KE55 and KE50R (Nov 1978 onwards)

Suits 3K-C ('California Spec') engined models as follows:

• Toyota Corolla KE30, KE35 and KE36
• Toyota Corolla KE50 (Japan only)
• Toyota Corolla KE20 (North America only)

Suits 3K-H ('High Octane Spec') engined models as follows:

• Toyota Corolla KE30 and KE36 (Japan only)
• Toyota Publica KP37 (Japan only)

Suits 2K engined models as follows:

• Toyota Publica KP30 and KE36 (also known as Toyota 1000)

These decals were fitted to rocker cover from the factory and provided instructions for valve clearances and other data such as air filter element change out.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.