Spare parts suitable for Toyota Corolla and Sprinter E80 Series

NOS and reproduction spare parts suitable to Toyota Corolla and Sprinter E80 series fifth generation models built between 1983 and 198

Door Card Trim Panel Clips Pack suitable for various Toyota models (TH0176)

Door card fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Supra, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door.

These are a push in clip that have a fit to a 9mm hole and have a T1 13mm head diameter with a stem length of 14mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica 

  • AA63, GA61, RA60, RA61, RA63, RA64, RA65, SA60, SA63, TA60, TA61, TA63, TA64
  • AT160, ST160, ST161, ST162, ST163, ST165 
  • AT180, ST182, ST183, ST184 and ST185

Toyota Corolla

  • KE30, KE35, KE36, KE38, TE31, TE37, TE38
  • TE47
  • KE50, KE55, TE51,
  • AE70, AE71, CE70, CE71, CE72, KE70, KE71, KE72, KE73, KE74, TE70, TE71, TE72, TE73, TE74
  • AE80, AE81, AE82, AE85, AE86, CE80, EE80

 Toyota Corona

  • AT140, AT141, CT140, CT141, CT147, KT147, RT141, ST140, TT142, TT147, YT140

 Toyota Hilux

  • LN50, LN51, LN55, LN56, LN57, RN50, RN55, RN58, YN50, YN51, YN52, YN55, YN56, YN57, YN58
    LN60, LN61, LN65, RN60, RN61, RN66, RN67, VZN61, VZN66, YN60, YN61G, YN61V, YN62, YN63, YN65, YN67
    RN70, RN75

 Toyota Supra

  • MA61, MA63

Toyota Land Cruiser 

  • BJ40, BJ41, BJ42, BJ44, BJ45, BJ46, FJ40, FJ45, HJ47
  • BJ60, BJ61, FJ60, FJ61, FJ62, FJ62G, FJ62V, HJ60, HJ61
  • BJ70, BJ71, BJ73, BJ74, BJ75, FJ70, FJ73, FJ75, HJ75, LJ75, LJ70, LJ71, LJ73, RJ70, RJ73 

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

5mm lead kit suitable for AE82 Toyota Corolla (TH54573) New Zealand

Genuine Eagle brand 5mm Leads to suit your AE82 Toyota Corolla built from 1983 to 1988 as sold in New Zealand

Our photo shows each of the boot and tube assemblies specific to this kit that suits the AE82 Toyota Corolla.

Suits 1.6L 4A-GEL DOHC Fuel Injection models of the AE82 Toyota Corolla.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$153.50

Floor Mat Set suitable for Toyota Corolla Sprinter AE86 LHD

Floor mat set for the passenger area of your left hand drive fifth generation E80 series Toyota Corolla Sprinter.

Suited to all LHD lift back Toyota Corolla Sprinter AE85 or AE86 built between 1983 to 1987 our carpet floor mats are well fitting and made in Australia to the highest quality with a non-slip foam backing. 

These mats are patterned from original OEM mats and are available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

You can also select the colour of yoru edge binding - simply use the drop down menu to select the colour you like.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fifth gen' Toyota Corolla Sprinter project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$150.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Push Fit Plastic Rivet Clip 8mm suitable for various Toyota models (TH0005 33A)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina and  MR2.

These clips have a 16mm head diameter, 11mm fitted length and fit to a 8mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Available in Black or Grey - use the second drop down menu to select.

Suits the following models:

Toyota MR2

  • AW11
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L
  • CDE120, NDE120, ZZE120 and ZZE121

Toyota Carina

  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • BJ60, BJ61, FJ60, FJ62, HJ60 and HJ61

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

* Product Colour:

Long Wheel Stud Kit suitable for Toyota Four Stud Hub

Suited to Toyota vehicles using four OEM wheel studs per hub.

Ensure good engineering practice with wheel studs that provide for proper engagement of wheel nuts with these longer than standard M12 1.5 pitch 72mm wheel studs.

Good engineering (safety) practice requires wheel nut engagement of the wheel stud to be the equivalent of the wheel stud diameter - 12mm for all Toyota models.

On a 1.5 pitch this means that your wheel nut must get at least 8 turns to ensure a safe and proper engagement.

Please check with us prior to purchase (This email address is being protected from spambots. You need JavaScript enabled to view it.) if your vehicle has been fitted with aftermarket hubs.

Toyota Heritage's long wheel stud kits provide enough length for proper engagement. Our open ended wheel nuts mean that they may also be used with a wide range of aftermarket and factory mag wheels.

Toyota Heritage offers four different wheel stud kits:

  • Kit 1 - Wheel studs only
  • Kit 2 - Wheel studs with wheel nuts suited to factory mag wheels
  • Kit 3 - Wheel studs with wheel nuts suited to after market mag wheels
  • Kit 4 - Wheel studs with wheel nuts suited to factory and after market mag wheels

Application:

Kit 1 (Stud Pack)

  • 16 pieces (wheel studs) in the kit
  • Perfect for when you have purchased after market mag wheels but you are not getting 8 turns of the wheel nuts the vendor supplied

Kit 2 (Factory Pack)

  • 32 pieces in the kit including studs and open-end flat seat wheel nuts with captive washers
  • Perfect for use with factory mag weels and using a wheel spacer up to 30mm to create offset to suit your handling set-up

Kit 3 (Aftermarket Pack)

  • 32 pieces in the kit including studs and open-end tapered seat wheel nuts
  • Perfect for use with almost any aftermarket mag wheel requiring a tapered seat wheel nut

Kit 4 (Track Pack)

  • 48 pieces in the kit including studs and open-end tapered seat wheel nuts plus open-end flat seat wheel nuts with captive washers
  • Perfect for the person who wants to run factory mag wheels around the streets and then switch to their track day wheels and tyres at the track

 

 

$93.60
* Pack Type:

5mm lead kit suitable for AE86 Toyota Corolla Sprinter (TH54573)

Genuine Eagle brand 5mm Leads to suit your AE86 Toyota Corolla Sprinter built from 1983 to 1987

Our photo shows each of the boot and tube assemblies specific to this kit that suits the AE86 Toyota Corolla Sprinter.

Suits 1.6L 4A-GE 16V DOHC Fuel Injection models of the AE86 Toyota Corolla Sprinter.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$153.50

Cargo Area Mat suitable for Toyota Corolla Sprinter AE86

Carpet mat for the boot (trunk) area of your fifth generation E80 series Toyota Corolla Sprinter.

Suited to all lift back Toyota Corolla Sprinter AE85 or AE86 built between 1983 to 1987 our carpet boot mats are well fitting and made in Australia to the highest quality with a non-slip foam backing and replaces original part 64701-12070.

This mat is patterned from an original OEM mat and is available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fifth gen' Toyota Corolla Sprinter project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$185.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Push Fit Plastic Rivet Clip 6.5mm suitable for various Toyota models (TH0372)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser and  MR2.

These clips have a 15mm head diameter, 12mm fitted length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • AW11L
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
  • AE101, AE102, CE100, EE100, EE101
  • WZE110, ZZE111 and ZZE112

Toyota Carina

  • ST170G
  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • FJ62, FJ62G, FJ62V, BJ60, BJ61, FJ60, HJ60 and HJ61

Toyota Hilux and Surf

  • LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, YN90, YN92
  • LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
  • LN110, LN112, RN110, YN110
  • RN125
  • KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
  • KDN150, LN152, LN155, RZN152, RZN154
  • KDN165, KZN165, RZN168, RZN169, VZN167
  • KDN170, LN171, LN172, RZN174, VZN172
  • KDN190, LN191, RZN193
  • LN200, RZN200
  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • ST171, CT176, ET176, ST171
  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Inner Guard (Fender) Fastener Clip Pack suitable for various Toyota models (TH0385)

Inner guard (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Camry, MR2, Carina, Caldina

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

 Toyota MR2

  • AW10 and AW11
  • SW20 and SW21
  • ZZW30

Toyota GR Four Yaris

  • GXPA16

Toyota Corolla

  • AE81, AE82, AE85 and AE86
  • AE90, AE92, AE93, AE94, AE95 and AE96
  • AE101, AE102 and AE112 

 Toyota Camry

  • SV10, SV11, SV12, CV10 and CV11
  • SV20, SV21 and SV22

Toyota Caldina 

  • ST191, ST195 and ST198

 Toyota Carina

  • TA40, TA41, TA42, TA47, TA57, RA40, RA45, RA46, RA55 and RA56
  • AA60, KA67V, AA63, TA60, TA61, TA67V, TA62, TA63, RA63, CA60 and CA67V
  • ST162
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V
  • AT192, AT190, AT191, ST190, ST195, CT190 and CT195
  • AAT212, AT210, AT211, ST210, ST215, CT210, CT215, CT211 and CT216

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$25.00
* Pack size:

Floor Mat Set suitable for Toyota Corolla AE82 FX-GT RHD

Floor mat set for the passenger area of your right hand drive fifth generation E80 series Toyota Corolla 3 Door.

Suited to all RHD lift back Toyota Corolla AE82 FX-GT or FX-SR built between 1983 to 1987 our carpet floor mats are well fitting and made in Australia to the highest quality with a non-slip foam backing. 

These mats are styled from original OEM mats and are available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

Available in six different edge binding colours - please use the third drop down menu to select the colour of your choice.

Displayed here in Ice Blue (formerly Kingfisher) with grey edge binding and in loop pile this combination has a real in 1980's look and feel.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fifth gen' Toyota Corolla 3 Door project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$150.00
* Carpet Colour:

* Carpet Pile:

* Edge Binding Colour:

Floor Mat Set suitable for Toyota Corolla Sprinter AE86 RHD

Floor mat set for the passenger area of your right hand drive fifth generation E80 series Toyota Corolla Sprinter.

Suited to all RHD lift back Toyota Corolla Sprinter AE85 or AE86 built between 1983 to 1987 our carpet floor mats are well fitting and made in Australia to the highest quality with a non-slip foam backing. 

These mats are patterned from original OEM mats and are available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fifth gen' Toyota Corolla Sprinter project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$150.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Engine Bay Inner Guard Bumper Bar Clip Pack suitable for various Toyota models (TH0333)

Toyota push mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 18mm head diameter, 9mm stem length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • ZZW30

Toyota Celica 

  • ZZT230 and ZZT231

Toyota GR Four Yaris

  • GXPA16

Toyota Corolla

  • AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
  • AE101, AE102, CE100, EE100, EE101
  • ZZE110, WZE110, ZZE111 and ZZE112
  • NZE120, NZE141, ZZE120, ZZE121, ZZE122, ZZE123, CDE120, NDE120, NZE120, ZRE120
  • ZZE130
  • ZRE142, ZRE143, ZZE141, ZZE142, AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182

Toyota Carina

  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Hilux and Surf

  • LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, YN90, YN92
  • LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
  • LN110, LN112, RN110, YN110
  • RN125
  • KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
  • KDN150, LN152, LN155, RZN152, RZN154
  • KDN165, KZN165, RZN168, RZN169, VZN167
  • KDN170, LN171, LN172, RZN174, VZN172
  • KDN190, LN191, RZN193
  • LN200, RZN200
  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP90, EP91, EP95 and NP90

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Bonnet (Hood) Weather Strip Clips Pack suitable for various Toyota models (TH0391)

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • All models from KE30 through to ZWE182

 Toyota Corona

  • All models from ST140 through to ST215

Toyota Cressida

  • All models from MX32 through to RX81

Toyota Hilux and Surf

  • All models from LN130 through to VZN185

Toyota Land Cruiser

  • All models from BJ60 through HZJ105

Toyota MR2

  • AW10 andAW11
  • ZZW30

 Toyota Supra

  • GA70, JZA70 and MA70
  • JZA80

Toyota Starlet

  • KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Floor Mat Set suitable for Toyota Corolla E80 Series RHD

Floor mat set for the passenger area of your right hand drive fifth generation E80 series Toyota Corolla.

Suited to all five door lift back and four door RHD Toyota Corolla E80 series built between 1983 to 1987 including AE80,  AE81, AE82, CE80, and EE80 our carpet floor mats are well fitting and made in Australia to the highest quality with a non-slip foam backing. 

These mats are styled from original OEM mats and are available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

Available in six different edge binding colours - please use the third drop down menu to select the colour of your choice.

Displayed here in Ice Blue (formerly Kingfisher) with grey edge binding and in loop pile this combination has a real in 1980's look and feel.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fifth gen' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$150.00
* Carpet Colour:

* Carpet Pile:

* Edge Binding Colour:

Side Marker Lamp Lenses suitable for Toyota Celica Supra Corolla and Hilux

Reproduction side marker lenses to suit A60 series Toyota Celica and Supra, E80 series Toyota Corolla and N80 series Toyota Hilux

Available in factory amber or custom clear or smoke - simply use the drop down menu to select.

Replacing original part number 81731-14140 these lenses were fitted to the mud guard (aka fender or wing) of the following models:

A60 series Toyota Celica - AA63, RA61, RA63 and TA60

A60 series Toyota Supra - MA61

E80 series Toyota Corolla - AE82 FX-GT

N80 series Toyota Hilux - RN85 and LN85

Complete your 'classic' Toyota Celica, Toyota Supra, Toyota Corolla or Toyota Hilux project in style - whether its a retro-ride, daily driver, restoration project or shop truck!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$50.00
* lense colour options:

Exterior Moulding or Vent Clip Pack suitable for various Toyota models (TH0497)

Toyota exterior moulding clip pack to suit various Toyota models - Corolla, Carina, Corona, Hilux, Surf, Land Cruiser, MR2, Starlet and Supra

These clips have a 7mm square head and rubber washer and are plastic push in trim clips used to fasten side mouldings, vents, grillesand various other exterior trim items.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

  • GA70, JZA70 and MA70

Toyota MR2

  • ZZW30

Toyota Corolla

  • AE80, AE81, AE82, CE80, EE80
  • AE91, AE92, CE90, CE96, CE97, EE90, EE96, EE97, EE98
  • AE100, AE101, AE102, CE100, CE106, CE108, CE109, EE100, EE101, EE105, EE106, EE107 and EE108

Toyota Carina

  • TA60, TA62, CA60, SA60
  • AT170, AT171, CT170, CT176, ET176, ST170 and ST171

Toyota Corona 

  • CT147, KT147, TT147, YT140
  • AT177, CT176, CT177, ET176 and ST171

Toyota Starlet

  • EP70, EP71, EP76, NP70 and NP76

 Toyota Hilux / Surf

  • KDN185, KZN185, RZN180, RZN185 and VZN185

Toyota Land Cruiser

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

 Toyota Soarer

  • JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

4A-GEL 7mm lead kit suitable for AE82 Toyota Corolla (TH74190)

Genuine Eagle brand 7mm ignition leads to suit your AE82 Toyota Corolla built from 1988 to 1989.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the  AE82 Toyota Celica

Suits 1.6L 4A-GEL DOHC 16V Fuel Injection models of the AE82 Toyota Corolla.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$96.50

Moulded Carpet suitable for Toyota Corolla E80 Series

Front and rear moulded floor carpet for your fifth generation E80 series Toyota Corolla.

Suited to all RHD FWD Toyota Corolla E80 series built between 1983 to 1988 including AE80, AE81, AE82, CE80, and EE80 our moulded carpets are well fitting and made in Australia to the highest quality and replaces OEM carpets nicely.

NOTE: these carpets do not suit RWD variants AE85 and AE86.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fifth gen' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$240.00
* Carpet Colour:

* Carpet Pile:

Rear Indicator Lenses (Clear) suitable for Toyota Corolla E80 series AE85 AE86

Clear coloured rear indicator lense to suit your AE86 Corolla. You are buying the clear lenses only as seen in the first photo - photo4 is to show application and the rear end type that these may be fitted to. Replaces original lenses with parts no's 81560-80168 and 81550-80163. Application is AE86 lift back models from 1983 to early/mid 1985, and includes variants such as GT-APEX, GT-S, GT-V, GT, and SR-5. They may also fit the AE85, basic variants of the AE86 lift back. These are made using the highest calibre manufacturing techniques and fit with precision. Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch. Amber coloured bulbs must be used with this item. Vendor does not warrant regulatory compliance.

$190.00