Spare parts suitable for Toyota Publica

NOS and reproduction spare parts suitable for Toyota Publica P10, P20, P30 and P50 series first, second and third generation models built from 1961 to 1978

2U Engine Air Cleaner Assembly Decal (Early Type) suitable for UP15 or UP20S

Complete your early Toyota Sports 800 or UP20S Publica Sports restoration project in style with a reproduction 2U air cleaner assembly decal.

These 2U air cleaner decals were fitted to the top face of the air cleaner assembly of all early built UP15 model Toyota Sports 800 also known as 'Yota-Hachi' and also on the UP20S Toyota Publica Sports that was fitted wuth twin carburettors.

You may find that your original decal is missing as an owner may have removed it for replating of the air cleaner assembly or sometimes they have peeled or corroded and are no longer legible.

Our reproduction decals are accurate in every detail and printed using original foil type material.

We ship globally to all countries weekly.

$12.00

K Engine Dual Valve Springs with Titanium Retainers 3K 4K suitable for Corolla Starlet Publica

Toyota K engine dual valve springs with Titanium retainers.

Suitable for all K, 3K, 4K and 5K applications. Road, rally, race or drift.

Designed for use in engines with modified camshafts which typically require the engine to spin faster in order to make more power. These springs will better control the valve motion and therefore allow a higher engine RPM before valve bounce occurs (ie the loss of valve control point). These springs also allow camshafts to have more aggressive acceleration ramps, ie open the valve faster. 

The retainers accept factory locks (collets), which Toyota Heritage can supply if needed.

The original factory standard installed height will provide 38.6kg (85lb) on the valve seat. The table below gives all the data.

mm inch   kg lbs
40 1.575   27.27 60
35 1.378   50.00 110
30 1.181   72.73 160
25 0.984   99.09 218
22 0.866   124.55 274
21 0.827   bound bound

Can ship worldwide - no problems for overseas buyers.

$305.00

K Engine Valve Clearance decal suitable for various Toyota models 4K-C 3K-H 3K-C 2K

Reproduction valve clearance decal for Toyota models with 2K, 3K-H, 3K-C or 4K-C engines.

Suits 4K-C ('California Spec') engined models as follows:

  • Toyota Corolla KE50, KE55 and KE50R (Nov 1978 onwards)

Suits 3K-C ('California Spec') engined models as follows:

  • Toyota Corolla KE30, KE35 and KE36
  • Toyota Corolla KE50 (Japan only)
  • Toyota Corolla KE20 (North America only)

Suits 3K-H ('High Octane Spec') engined models as follows:

  • Toyota Corolla KE30 and KE36 (Japan only)
  • Toyota Publica KP37 (Japan only)

Suits 2K engined models as follows:

  • Toyota Publica KP30 and KE36 (also known as Toyota 1000)

These decals were fitted to rocker cover from the factory and provided instructions for valve clearances and other data such as air filter element change out.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$10.00
Out of stock

Tail Lamp Lenses (Red Amber) suitable for Toyota Publica UP10

Reproduction front indicator parker lenses to suit your first generation P10 series Toyota Publica.

Suited to all UP10 and UP10D Toyota Publica built between 1961 to 1966 these lenses have been made in Australia to the highest quality and replace Koito original product number L1660.

This lovely red-amber combination lens were fitted to cars originally delivered in Japan, Australia, New Zealand, Thailand, Malaysia, Singapore and Europe.

These lenses are fitted to mid to all variants of the P10 Toyota Publica range including Toyota 700, Publica and UP700.

Complete your 'old school' Toyota Publica project in style - whether its a retro-ride, daily driver or detailed restoration project!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$105.00

2U Engine Air Cleaner Assembly Decal (Late Type) suitable for UP15 and UP20S

Complete your early Toyota Sports 800 or UP20S Publica Sports restoration project in style with a reproduction 2U air cleaner assembly decal.

These 2U air cleaner decals were fitted to the side face of the air cleaner assembly of all early built UP15 model Toyota Sports 800 also known as 'Yota-Hachi' and also on the UP20S Toyota Publica Sports that was fitted wuth twin carburettors.

You may find that your original decal is missing as an owner may have removed it for replating of the air cleaner assembly or sometimes they have peeled or corroded and are no longer legible.

Our reproduction decals are accurate in every detail and printed using original foil type material.

We ship globally to all countries weekly.

$12.00

Factory Auxiliary Driving Light Lenses suitable for various Toyota models

Complete your early Toyota restoration project in style with a pair of reproduction lenses to suit your early style factory Toyota Motor Corp auxiliary ('driving') lights.

Replaces original Koito part number L2589.

Mostly fitted to Toyota Stout and Toyota Land Cruiser these were also fitted as factory auxiliary driving lights on Crown, Corolla, Corona, Mark ii, and Hilux just to name a few other models.

You may find that your original lense is missing or cracked. These wonderful reproduction lenses are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers

$70.00

3K-B Valve Clearance decal suitable for various Toyota models

Reproduction valve clearance decal for Toyota models with 3K-B engines.

Suits 3K-B engined models as follows:

  • Toyota Corolla KE11, KE17 and KE18 (SL variants only)
  • Toyota Corolla KE20, KE25 and KE26V (Japan and Australia only)
  • Toyota Corolla KE30 and KE35 (Japan and Australia).
  • Toyota Starlet KP47 and KP50 (also known as Publica in some markets)

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

Gear Selection Decal suitable for Toyota Publica UP20

Reproduction Gear Selection decal to suit your second generation P20 series Toyota Publica.

Suited to all P20 series sedans, station wagon, pick-up utility, convertible and detachable roof versions of the Publica built between 1966 to 1969. This included UP800 as they were known as in Australia as well as UP26, UP20S and UP26V-D.

These decals were fitted on the dash and have often peeled off over time or been gouged or scratched away. They are no longer available from TMC. The decals were fitted to inform drivers of the correct gear to select at which speed of travel.

Reproduced meticulously to original detail including print stock and text through.

Complete your 'old school' Toyota Publica project in style - whether its a retro-ride, drift car, street driver, restoration project or even race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$7.50

Alternator Decal suitable for Toyota Sports 800 UP15 Toyota Publica UP20

Complete your early Toyota Sports 800 or UP20 Toyota Publica restoration project in style with a reproduction alternator decal.

These alternator decals were fitted to the side face of the alternator of all UP15 model Toyota Sports 800 also known as 'Yota-Hachi' and also on the UP20 Toyota Publica models including UP20, UP20S, UP26 and UP26V-D.

You may find that your original decal is missing or sometimes they have peeled or corroded and are no longer legible.

Our reproduction decals are accurate in every detail and printed using original foil type material.

We ship globally to all countries weekly.

$9.50

TEQ Build Plate early models to 1974

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and early 1970's. Generally these were used up till December 1974, but this may vary in some countries.

We have seen these on Crown, Corolla, Corona, Mark ii, Stout, Publica, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

Tail Lamp Lenses (Red) suitable for Toyota Publica P10 series UP10 Toyota 700

Complete your 'old school' Toyota Publica project in style.

Pair of tail light lenses to suit early year Toyota Publica models from 1961 to 1966. Suits UP10 series models such as UP700 and Toyota 700. Was used extensively throughout all build years in the USDM as well as early build years in Japan, Australia, New Zealand and Papua New Guinea.

Look great fitted to vintage restoration projects, resto-mod or even rat rod.

Shipping worldwide weekly - no problems for overseas buyers.

$90.00

Tire Pressure Decal suitable for Toyota Publica UP20

Reproduction Tire Pressure decal to suit your second generation P20 series Toyota Publica.

Suited to all P20 series sedans, station wagon, pick-up utility, convertible and detachable roof versions of the Publica built between 1966 to 1969. This included UP800 as they were known as in Australia as well as UP26, UP20S and UP26V-D.

These decals were fitted inside the door jamb area and have often peeled off over time or been gouged or scratched away. They are no longer available from TMC. The decals were fitted to inform drivers of the correct tyre pressure to be used  for front and rear tyres. 

Reproduced meticulously to original detail including print stock and text through. 

Complete your 'old school' Toyota Publica project in style - whether its a retro-ride, drift car, street driver, restoration project or even race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$7.50

Head Lamp and Grille Fastener Clip Pack suitable for various Toyota models (TH0330)

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

  • KE10, KE11, KE15, KE16, KE17 and KE18
  • KE20, KE25, TE21, TE25, TE27 and TE26
  • KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
  • TE72
  • AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

  • FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

  • KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

  • TA10
  • KA67
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

  • TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
  • TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

  • All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

TEQ Build Plate Early Models to 1974 Japan Delivery

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate for vehicles with original delivery in Japan.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and early 1970's. Generally these were used up till December 1974, but this may vary on some models.

We have seen these on Crown, Corolla, Corona, Mark ii, Stout, Publica, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

Front Indicator Lenses (Amber) suitable for Toyota Publica UP10

Reproduction front indicator parker lenses to suit your first generation P10 series Toyota Publica.

Suited to all UP10, UP10V and UP10D Toyota Publica built between 1961 to 1966 these lenses have been made in Australia to the highest quality and replace Koito original product number L1285.

These lenses are fitted to mid to all variants of the P10 Toyota Publica range including Toyota 700, Publica and UP700.

Complete your 'old school' Toyota Publica project in style - whether its a retro-ride, daily driver or detailed restoration project!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$75.00

Generator Decal suitable for Toyota Publica UP10 UP20

Complete your UP10 Toyota Publica or UP20 Toyota Publica restoration project in style with a reproduction generator decal.

These generator decals were fitted to the side face of the generator all UP10 model Toyota Publica such as UP10 and UP10D also known as Toyota 700 as well as the UP20 Toyota Publica models known as Toyota 800 including UP20, UP20S, UP26 and UP26V-D.

You may find that your original decal is missing or sometimes they have peeled or corroded and are no longer legible.

Our reproduction decals are accurate in every detail and printed using original foil type material.

We ship globally to all countries weekly.

$9.50

Dealership Stock Plate (York Motors) suitable for Toyota Corolla Crown Corona Tiara

Complete your early Toyota restoration project with an authentic type York Motors Toyota dealership stock plate plate.

These Stock Plates were fitted in the engine bay of all early model Toyota's built during the 1960's and early 1970's. Used extensively on locally built AMI cars but also on fully imported models and this included Crown, Corolla, Sprinter, Corona, Mark ii, Tiara and Publica.

Often many cars that were sold through York Motors have lost this plate or when an owner has removed it for painting the original plate has been deformed.

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

Compliments our TEQ Build plate very nicely adding those finishing touches to the engine bay for an authentic restoration.

The pricing includes having your car's unique stock number applied to the plate before we ship it to you.

$75.00
6 In Stock

3K-B Engine decal suitable for various Toyota model

Reproduction valve clearance decal for Toyota models with 3K-B engines.

Suits the following Toyota vehicles fitted with a 3K-B engine:

  • Toyota Corolla KE11, KE17 and KE18 (SL variants only)
  • Toyota Corolla KE20, KE25 and KE26V (Japan and Australia only)
  • Toyota Corolla KE30 and KE35 (Japan and Australia).
  • Toyota Starlet KP47 and KP50 (also known as Publica in some markets)

These decals were fitted to the top of the rocker cover from the factory to denote the installation of the mighty 3K-B engine.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$9.50

Front Indicator Lenses (Clear) suitable for Toyota Publica UP10

Reproduction front indicator parker lenses to suit your first generation P10 series Toyota Publica.

Suited to all UP10, UP10V and UP10D Toyota Publica built between 1961 to 1966 these lenses have been made in Australia to the highest quality and replace Koito original product number L1285.

These lenses are fitted to mid to all variants of the P10 Toyota Publica range including Toyota 700, Publica and UP700.

Complete your 'old school' Toyota Publica project in style - whether its a retro-ride, daily driver or detailed restoration project!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$75.00

Starter Motor Decal suitable for Toyota Publica UP20 and Toyota Sports 800 UP15

Complete your UP20 Toyota Publica or UP15 Toyota Sports 800 restoration project in style with a reproduction starter motor decal.

These starter motor decals were fitted to the side face of the starter motor of all late build UP15 Toyota Sports 800 and all UP20 model Toyota Publica such as UP20, UP20S and UP20D also known as Toyota 800. 

You may find that your original decal is missing or sometimes they have peeled or corroded and are no longer legible.

Our reproduction decals are accurate in every detail and printed using original foil type material.

We ship globally to all countries weekly.

$9.50