Spare parts suitable for Toyota N30 N40 Hilux

This decal was applied to all Japanese built Toyota models throughout the late 1960's to 1980.

This included modesl such as Land Cruiser (FJ40, FJ45, FJ55 etc), Hilux (RN15, RN25 etc), Crown (MS55, MS60, MS70, MS80 etc), Celica (A20 series) and Corolla (E20 and E30 series).

Complete your classic Toyota Restoration in style with this decal that is applied to the top face of the radiator adjacent to the radiator cap.

Fitted at the very top of the radiator, this decal is most visible immediately when the bonnet (hood) is opened and provides that finishing touch to a resto.

Often the original decal may have been removed when the radiator was reconditioned, replaced or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

Pair of brand new genuine OEM side marker lights.
Complete with housing, lense and wiring.
OEM part number: 81730-89108
Koito number: 14-63L
Complete your N40 series Hilux in style - Why bother with used parts when you can have genuine lenses.
Easy to install.
Worldwide shipping available - no problems for overseas buyers.

Complete your early Toyota restoration project in style with a pair of reproduction lenses to suit your early style factory Toyota Motor Corp auxiliary ('driving') lights.

Replaces original Koito part number L2589.

Mostly fitted to Toyota Stout and Toyota Land Cruiser these were also fitted as factory auxiliary driving lights on Crown, Corolla, Corona, Mark ii, and Hilux just to name a few other models.

You may find that your original lense is missing or cracked. These wonderful reproduction lenses are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

• CV10, CV11, SV10, SV11, SV12
• MCV20, MCV21, SXV20, SXV23, SXV25
• MCV36, ACV36
• ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

• TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
• AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
• AT160, ST160, ST161, ST162, ST163, ST165
• AT180, ST182, ST183, ST184, ST185
• AT200, ST202, ST203, ST204, ST205
• ZZT230 and ZZT231 

Toyota Corona

• RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
• RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
• AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
• T160, T170, T190 series
• T200, T210, T220 series

Toyota Cressida

• RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
• X60, X70 and X80 series

Toyota Carina

• A10, A40, A60 series
• T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

• KE30, KE35, KE38, KE55, TE55, TE37
• KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
•  AE80, EE80, AE81 AE85, AE82, AE86, CE80
• AE90, AE92, AE93, AE94, AE95, AE96
• AE101, AE111, AE112
• ZRE120
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

• RN10, RN15
• RN20, RN25
• RN30, RN35, RN40, RN45
• RN50, RN60, YN60, LN60, RN70, YN70, LN70
• N80, N90, N100, N110 series
• N120 series
• N130 series
• N140 series

Toyota Land Cruiser 

• FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
• FJ55, FJ55G, FJ55V, FJ56
• FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
• FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
• HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

• J90, J120 and J150 series

Toyota Starlet

• KP60, KP61, KP62
• P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction front bumper indicator lenses for your third generation N30 or N40 series Toyota Hilux.

Suited to all Toyota Hilux RN30, RN35, LN30, LN35, RN40, RN45 built between 1978 to 1983 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number 35-3L (left side) and 35-3R (right side).

These lenses were fitted to the front bumper of the Toyota Hilux shortbed and longbed variants of the Toyota Hilux.

Available in clear or factory amber - simply select by using the drop down menu.

Complete your 'old school' Toyota Hilux project in style - whether its a retro-ride, drift truck, daily driver, restoration project or even a shop truck!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

• Clear Clear
• Amber Amber
•  

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

• KE10, KE11, KE15, KE16, KE17 and KE18
• KE20, KE25, TE21, TE25, TE27 and TE26
• KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
• TE72
• AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

• FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

• KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

• TA10
• KA67
• ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

• TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
• TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

• All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your 'old school' Toyota project with this reproduction factory six row fuse box.

Complete with a cover that displays correct fuse allocation and TEQ logo, this suits all early model Toyota vehicles including:

• Landcruiser early BJ, HJ and FJ
• Crown MS40 RS40 series
• Corona RT40 series
• Publica
• Stout

This is high quality replacement product that will help your car's electrical system come back to life.

Bolts straight into most models and overcomes problems with broken fuse housings.

Worldwide shipping weekly - no problems for overseas buyers.

Upgrade your engine performance with this down draft manifold suitable for Toyota 18R and 8R engines.

This genuine Redline intake manifold is designed to fit two twin DCN Weber Carbs (40DCN) and will the following models:

Toyota Corona

• 8R engine - RT83 RT93 
• 18R engine - RT85, RT95, RT89V, RT104, RT114, RT118, RT122

Toyota Mark ii (including Corona Mark ii)

• 8R engine - RT62 (not DOHC), RT63, RT73, RT78, RT79, RX12, RX22, RX28 
• 18R engine - RT85, RT95, RT89V, RT104, RT114, RT118, RT122

Toyota Hilux

• 8R engine - RN10 & RN15 (USA only) 
• 18R engine - RN10 & RN15 (USA only), RN22, RN27, RN30, RN40

These Australian made high quality manifolds are made using highly developed casting and precision tooling. Made to match original specifications for mounting these will complete any project and add performance.

Koromo Heritage is also able to supply ancilliary items for fitments such as studs, gaskets and spacers as well as carburettors and airfilter assemblies - please email This email address is being protected from spambots. You need JavaScript enabled to view it. to enquire.

Shipping worldwide every week - so no problems for international buyers.

Reproduction fender side marker lenses for your third generation N30 or N40 series Toyota Hilux. 

Suited to all Toyota Hilux RN30, RN35, LN30, LN35, RN40, RN45 built between 1978 to 1983 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number 14-63L (left side) and 14-63R (right side).

These lenses were fitted to the fender (mud guard) of the Toyota Hilux shortbed and longbed variants of the Toyota Hilux.

Available in clear or factory amber - simply select by using the drop down menu.

Complete your 'old school' Toyota Hilux project in style - whether its a retro-ride, drift truck, daily driver, restoration project or even a shop truck!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.