Spare parts suitable for Toyota Soarer Z30 Series

Bumper cover fastener clip pack to suit various Toyota models - Celica, MR2, Supra and Soarer.

These clips are used to fasten front and rear bumpers into place. 

These are a push in clip that expands when the 9mm head is pushed in and holds firmly in place.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica (front bumper)

• AT180, ST182, ST183, ST184 and ST185

Toyota MR2 (front bumper)

• SW20 and SW21

 Toyota Supra (front and rear bumper)

• JZA80

Toyota Soarer (front and rear bumper)

• JZZ30, JZZ31, UZZ30, UZZ31 and UZZ32

 Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Genuine Eagle brand 5mm ignition leads to suit your Toyota Soarer fitted with a 1JZ-GTE engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 1JZ-GTE engines.

Suits 2.5L 1JZ-GTE DOHC 24V Soarer models as follows:

• JZZ30 Turbo

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Improve handling and performance of your third generation Toyota Soarer Z30 series with a custom rear Sway Bar.

Toyota Heritage sway bars are Australian made, three-way adjustable and powder coated to the highest standards.

The standard size rear sway bar we offer for the Z30 series Toyota Soarer is 24mm (rear) finished in red powder coat. Ideal for street and track with increased torsional stiffness of 15% to 30% over factory sized bars.

Suited to all variants in the Z30 series Toyota Soarer built 1991 - 2000 including JZZ30, JZZ31, UZZ30, UZZ31 and UZZ32.

Our Z30 series Toyota Soarer rear sway bar comes complete with bushes, brackets, links and lateral locks.

We offer the opportunity for buyers to customise their sway bar by selecting the size required in the drop down menu 'Sway Bar Size'.

Buyers can select their desired sway bar thickness starting at 18mm and up to 25mm (or even thicker if required).

We ship worldwide weekly - no problems for overseas buyers.

Toyota exterior moulding clip pack to suit various Toyota models - Corolla, Carina, Corona, Hilux, Surf, Land Cruiser, MR2, Starlet and Supra

These clips have a 7mm square head and rubber washer and are plastic push in trim clips used to fasten side mouldings, vents, grillesand various other exterior trim items.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

• GA70, JZA70 and MA70

Toyota MR2

• ZZW30

Toyota Corolla

• AE80, AE81, AE82, CE80, EE80
• AE91, AE92, CE90, CE96, CE97, EE90, EE96, EE97, EE98
• AE100, AE101, AE102, CE100, CE106, CE108, CE109, EE100, EE101, EE105, EE106, EE107 and EE108

Toyota Carina

• TA60, TA62, CA60, SA60
• AT170, AT171, CT170, CT176, ET176, ST170 and ST171

Toyota Corona 

• CT147, KT147, TT147, YT140
• AT177, CT176, CT177, ET176 and ST171

Toyota Starlet

• EP70, EP71, EP76, NP70 and NP76

 Toyota Hilux / Surf

• KDN185, KZN185, RZN180, RZN185 and VZN185

Toyota Land Cruiser

• FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

 Toyota Soarer

• JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Front and rear floor carpet set for your third generation Z30 series Toyota Soarer (also known as SC300 Lexus)

Suited to all Toyota Soarer JZZ30, JZZ31, UZZ30, UZZ31 and UZZ32 built between 1991 to 2000 our boot (trunk) carpet mats is patterned off the OEM factory original mat, is well fitting and made in Australia to the highest quality with a non-slip foam backing.

Displayed here in Raven (formerly 'Black') with a red edge binding, these mats provide a quality look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Available with six edge binding colours - just use the third drop down menu to select the colour of your choice.

Complete your 'third gen' Toyota Soarer Z30 series project in style - whether its a daily driver, drift machine or detailed restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Edge binding colours Edge binding colours
• 
•  

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Genuine Eagle brand 5mm ignition leads to suit your Toyota Soarer fitted with a 2JZ-GE engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 2JZ-GE engines.

Suits 3.0L 2JZ-GE DOHC 24V Soarer models as follows:

• JZZ31 (Sept 1997 onwards)

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Door card, side trim panel and fascia fastener clip pack to suit various Toyota models - Caldina, Celica, Corolla, Corona, Supra, MR2, Soarer, Prado, Yaris, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door as well as other interior trim and fascia panels.

These are a push in clip that have a fit to a 9mm hole size and measure 12.8mm ( top head diameter), 15.6mm (centre head diameter) , 17.7mm (bottom head diameter) with a stem length of 14.2mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Caldina

• AT191, CT190, CT196, CT197, CT198, CT199, CT216, ET196, ST190, ST191, ST195, ST198
• AT211, ST210, ST215

 Toyota Celica 

• ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

• AE91, AE92, AE95, CE90, EE90
• AE100, AE101, AE102, AE103, AE104, CE100, CE101, CE104, EE100, EE101
• AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
• CDE120, ZRE120, ZZE120, ZZE121, ZZE122 and ZZE123

 Toyota Corona

• YT140

 Toyota Hilux

• KDN145, LN140, LN141, LN145, LN147, RZN142, RZN144, RZN147, RZN148, RZN149
• KDN150, KDN151, LN150, LN152,
• KDN165, KDN166, KZN165, LN166, LN167
• KDN170, LN170, LN171, LN172, RZN173, RZN174, VZN172
• KDN190, KZN190, LN192 and RZN194

  Toyota Supra

• MA61, MA63

Toyota Land Cruiser 

• BJ60, FJ62, HJ60
• BJ73, FJ70, FJ73, FJ75, FZJ70, FZJ71, FZJ73, FZJ74, FZJ75, FZJ78, FZJ79, HDJ78, HDJ79, HJ75, HZJ70, HZJ71, HZJ73, HZJ74, HZJ75, HZJ76, HZJ77, HZJ78, HZJ79, KZJ70, KZJ71, KZJ73, KZJ77, KZJ78, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ75, PZJ77, RJ70, RJ73, RJ77
• FJ80, FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
• FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

• KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota MR2 

• SW20 and SW21

Toyota Soarer

• JZZ30, UZZ30, UZZ31 and UZZ32

Toyota Supra

• JZA80

Toyota Yaris 

• NCP10, NCP11, NCP12, NCP13, NLP10, SCP10
• NCP20
• EP80, EP81, EP82, EP85, NP80
• EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota bonnet (hood) insulation clip pack to suit various Toyota models - Celica, Corolla, Hilux, Surf, Prado, Soarer and Supra

These clips have a 24.5mm head are used with a 7mm hole and are plastic push in trim clips used to fasten the under bonnet (hood) insulation sheet. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• ZZT230 and ZZT231

Toyota Supra

• JZA80

Toyota Corolla

• AE101, CE101, CE102, CE105, CE107
• AE111, AE115, CDE110, CE113, CE116, WZE110, ZZE11, ZZE112
• CDE120, NDE120, ZRE120, ZZE120, ZZE121 and ZZE122

Toyota Hilux / Surf

• GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Prado

• GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121 and VZJ125

 Toyota Soarer

• JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Front and rear floor carpet set for your third generation Z30 series Toyota Soarer (also known as SC300 Lexus)

Suited to all RHD Toyota Soarer JZZ30, JZZ31, UZZ30, UZZ31 and UZZ32 built between 1991 to 2000 our floor mats are patterned off the OEM factory original mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

Displayed here in Raven (formerly 'Black') with a red edge binding, these mats provide a quality look and feel.

There are five mats included in the set and this includes the two front foot well mats, the two rear floor well mats plus the mat that fits across the drive shaft tunnel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Available with six edge binding colours - just use the third drop down menu to select the colour of your choice.

Complete your 'third gen' Toyota Soarer Z30 series project in style - whether its a daily driver, drift machine or detailed restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Edge binding colours Edge binding colours
• 
•  

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•