Spare parts suitable for Toyota 86 ZN6 Series

NOS and reproduction spare parts suitable for Toyota 86 ZN6 first generation models from 2012 to 2021

Front and Rear Sway Bar Kit suitable for Toyota 86 ZN6 Series

Improve handling and performance of your first generation ZN6 series Toyota 86 (GT86) with a custom front and rear Sway Bar just like those used in the Toyota 86 Racing Series.

Toyota Heritage's sway bars are Australian made, two-way adjustable (front) and three-way adjustable (rear) and are powder coated to the highest standards.

The standard size front sway bar we offer for the ZN6 Series Toyota 86 (GT86) is 20mm finished in red powder coat. Ideal for street and track with increased torsional stiffness over factory sized bars.

The standard size rear sway bar we offer for the ZN6 Series Toyota 86 (GT86) is 18mm finished in red powder coat. Ideal for street and track with increased torsional stiffness over factory sized bars.

Our ZN6 Series Toyota 86 (GT86) sway bar kit comes complete with bushes, brackets, links and lateral locks.

We offer the opportunity for buyers to customise their sway bar set by selecting the size required in the drop down menu 'Sway Bar Size'.

Buyers can select their desired sway bar thickness of 20mm or 22mm for the front bar and buyers can select their desired sway bar thickness for the rear bar starting at 18mm and up to 24mm.

We ship worldwide weekly - no problems for overseas buyers.

$600.00
* Front Sway Bar Diameter:

* Rear Sway Bar Diameter:

Floor Mat Set suitable for Toyota 86 ZN6 Series LHD

Front and rear floor carpet set for your ZN6 Series Toyota 86 - left hand drive.

Suited to all LHD Toyota 86 ZN6 series built between 2012 to 2021 our carpet floor mats are patterned off the OEM factory mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats included in the set and this includes the two front foot well mats and the two rear floor well mats. 

Displayed here in black with grey edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

You can also select the colour of your edge binding - simply use the drop down menu to select the colour you like.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'first gen' Toyota 86 ZN6 series project in style - whether its a daily driver, drift car or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$150.00
NOTE! This item is Made To Order
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Front Sway Bar Kit suitable for Toyota 86 ZN6 Series

Improve handling and performance of your first generation ZN6 series Toyota 86 (GT86) with a custom front Sway Bar.

Toyota Heritage's sway bar is Australian made, two-way adjustable and powder coated to the highest standards.

The standard size front sway bar we offer for the ZN6 Series Toyota 86 (GT86) is 20mm finished in red powder coat. Ideal for street and track with increased torsional stiffness over factory sized bars.

Our ZN6 Series Toyota 86 (GT86) front sway bar comes complete with bushes, brackets, links and lateral locks.

We offer the opportunity for buyers to customise their sway bar by selecting the size required in the drop down menu 'Sway Bar Size'.

Buyers can select their desired sway bar thickness of 20mm or 22mm (or even thicker if required).

We ship worldwide weekly - no problems for overseas buyers.

$350.00
* Front Sway Bar Diameter:

Long Wheel Stud Kit suitable for Toyota Five Stud Hub

Suited to Toyota vehicles using five wheel OEM studs per hub.

Ensure good engineering practice with wheel studs that provide for proper engagement of wheel nuts with these longer than standard M12 1.5 pitch 72mm wheel studs.

Good engineering (safety) practice requires wheel nut engagement of the wheel stud to be the equivalent of the wheel stud diameter - 12mm for all Toyota models.

On a 1.5 pitch this means that your wheel nut must get at least 8 turns to ensure a safe and proper engagement.

Please check with us (email This email address is being protected from spambots. You need JavaScript enabled to view it.) first if your vehicle has been fitted with aftermarket hubs. 

Toyota Heritage's long wheel stud kits provide enough length for proper engagement. Our open ended wheel nuts mean that they may also be used with a wide range of aftermarket and factory mag wheels.

Toyota Heritage offers four different wheel stud kits:

  • Kit 1 - Wheel studs only
  • Kit 2 - Wheel studs with wheel nuts suited to factory mag wheels
  • Kit 3 - Wheel studs with wheel nuts suited to after market mag wheels
  • Kit 4 - Wheel studs with wheel nuts suited to factory and after market mag wheels

Application:

Kit 1 (Stud Pack)

  • 20 pieces (wheel studs) in the kit
  • Perfect for when you have purchased after market mag wheels but you are not getting 8 turns of the wheel nuts the vendor supplied

Kit 2 (Factory Pack)

  • 40 pieces in the kit including studs and open-end flat seat wheel nuts with captive washers
  • Perfect for use with factory mag weels and using a wheel spacer up to 30mm to create offset to suit your handling set-up

Kit 3 (Aftermarket Pack)

  • 40 pieces in the kit including studs and open-end tapered seat wheel nuts
  • Perfect for use with almost any aftermarket mag wheel requiring a tapered seat wheel nut

Kit 4 (Track Pack)

  • 60 pieces in the kit including studs and open-end tapered seat wheel nuts plus open-end flat seat wheel nuts with captive washers
  • Perfect for the person who wants to run factory mag wheels around the streets and then switch to their track day wheels and tyres at the track

 

 

$117.00
* Pack Type:

Floor Mat Set suitable for Toyota 86 ZN6 Series RHD

Front and rear floor carpet set for your ZN6 Series Toyota 86 - right hand drive.

Suited to all RHD Toyota 86 ZN6 series built between 2012 to 2021 our carpet floor mats are patterned off the OEM factory mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats included in the set and this includes the two front foot well mats and the two rear floor well mats. 

Displayed here in black with grey edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

Available with your choice of edge binding colour - use the drop down menu to select.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'first gen' Toyota 86 ZN6 series project in style - whether its a daily driver, drift car or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$150.00
NOTE! This item is Made To Order
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Rear Sway Bar Kit suitable for Toyota 86 ZN6 Series

Improve handling and performance of your first generation ZN6 series Toyota 86 (GT86) with a custom rear Sway Bar.

Toyota Heritage's sway bar is Australian made, three-way adjustable and powder coated to the highest standards.

The standard size rear sway bar we offer for the ZN6 Series Toyota 86 (GT86) is 18mm finished in red powder coat. Ideal for street and track with increased torsional stiffness over factory sized bars.

Our ZN6 Series Toyota 86 (GT86) rear sway bar comes complete with bushes, brackets, links and lateral locks.

We offer the opportunity for buyers to customise their sway bar by selecting the size required in the drop down menu 'Sway Bar Size'.

Buyers can select their desired sway bar thickness starting at 18mm and up to 24mm (or even thicker if required).

We ship worldwide weekly - no problems for overseas buyers.

$300.00
* Rear Sway Bar Diameter:

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

Screw Mounting Grommet Clip Pack suitable for various Toyota models (TH0397)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, GT86, Hilux, Land Cruiser, Prado and Soarer.

These clips have a 16.8mm head diameter and fit to a 8.5mm square hole are a plastic push in trim clips used to fasten bumper covers, side members, side mouldings, radiator grilles and other plastic to metal body applications.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Corolla

  • NRE181, ZRE181, ZRE182 and ZWE182 (side member)

Toyota GT86

  • ZN6 (rear bumper)

Toyota Hilux

  • GUN112, KUN112, TGN110, TGN111 (radiator grille)
  • GGN120, GGN125, GUN122, GUN123, GUN125, GUN126, KUN122, KUN125, KUN126, LAN125, TGN120, TGN121, TGN126, TGN128 (radiator grille)
  • GGN135, GUN135, GUN136, KUN135, KUN136, TGN136, TGN138 (radiator grille)

Toyota Land Cruiser

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100 (hood [bonnet], fender [mudguard] and side moulding)

 Toyota Prado

  • GDJ150, GRJ150, KDJ150, LJ150, TRJ150 and TRJ155 (radio / dashboard)

Toyota Soarer

  • Z40 (side moulding)

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size: