Spare parts suitable for Toyota Land Cruiser J100 Series

NOS and reproduction spare parts suitable for J100 series Toyota Land Cruiser models built from 1998 to 2007

1HZ Engine Build Plate suitable for Toyota Land Cruiser and Coaster

Complete your early Toyota restoration project in style with a reproduction 1HZ engine build plate for your Toyota Land Cruiser or Toyota Coaster.

These '1HZ' engine Build Plates were fitted in the engine bay of Toyota Landcruiser J80 and J100 series built from 1990 to 2007 and B30, B40 and B50 series Toyota Coaster from 1990 to 2012. 

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

Select H or 2H engine or HJ45 build plate using the drop down menu.

We ship globally to all countries weekly.

$80.00

Floor Mat Set suitable for Toyota Land Cruiser J100 Series

Front and rear floor carpet set for your J100 series Toyota Land Cruiser.

Suited to all RHD Toyota Land Cruiser J100 series such as HZJ105, FZJ105, UZJ100 and HDJ100 built between 1998 to 2007 our carpet floor mats are patterned off original OEM floor mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are three mats included in the set and this includes the two front foot well mats and single piece rear floor well mats. 

Displayed here in Charcoal with grey edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'J100 series' Toyota Land Cruiser project in style - whether its a daily driver, serious offroader or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$165.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Exterior Moulding or Vent Clip Pack suitable for various Toyota models (TH0497)

Toyota exterior moulding clip pack to suit various Toyota models - Corolla, Carina, Corona, Hilux, Surf, Land Cruiser, MR2, Starlet and Supra

These clips have a 7mm square head and rubber washer and are plastic push in trim clips used to fasten side mouldings, vents, grillesand various other exterior trim items.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

  • GA70, JZA70 and MA70

Toyota MR2

  • ZZW30

Toyota Corolla

  • AE80, AE81, AE82, CE80, EE80
  • AE91, AE92, CE90, CE96, CE97, EE90, EE96, EE97, EE98
  • AE100, AE101, AE102, CE100, CE106, CE108, CE109, EE100, EE101, EE105, EE106, EE107 and EE108

Toyota Carina

  • TA60, TA62, CA60, SA60
  • AT170, AT171, CT170, CT176, ET176, ST170 and ST171

Toyota Corona 

  • CT147, KT147, TT147, YT140
  • AT177, CT176, CT177, ET176 and ST171

Toyota Starlet

  • EP70, EP71, EP76, NP70 and NP76

 Toyota Hilux / Surf

  • KDN185, KZN185, RZN180, RZN185 and VZN185

Toyota Land Cruiser

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

 Toyota Soarer

  • JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Bonnet (Hood) Support Rod Clamp suitable for various Toyota models (TH0460)

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

  • CV10, CV11, SV10, SV11, SV12
  • MCV20, MCV21, SXV20, SXV23, SXV25
  • MCV36, ACV36
  • ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

  • TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
  • AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
  • AT160, ST160, ST161, ST162, ST163, ST165
  • AT180, ST182, ST183, ST184, ST185
  • AT200, ST202, ST203, ST204, ST205
  • ZZT230 and ZZT231 

Toyota Corona

  • RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
  • RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
  • AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
  • T160, T170, T190 series
  • T200, T210, T220 series

Toyota Cressida

  • RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
  • X60, X70 and X80 series

Toyota Carina

  • A10, A40, A60 series
  • T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

  • KE30, KE35, KE38, KE55, TE55, TE37
  • KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
  •  AE80, EE80, AE81 AE85, AE82, AE86, CE80
  • AE90, AE92, AE93, AE94, AE95, AE96
  • AE101, AE111, AE112
  • ZRE120
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

  • RN10, RN15
  • RN20, RN25
  • RN30, RN35, RN40, RN45
  • RN50, RN60, YN60, LN60, RN70, YN70, LN70
  • N80, N90, N100, N110 series
  • N120 series
  • N130 series
  • N140 series

Toyota Land Cruiser 

  • FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
  • FJ55, FJ55G, FJ55V, FJ56
  • FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
  • FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
  • HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

  • J90, J120 and J150 series

Toyota Starlet

  • KP60, KP61, KP62
  • P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$7.50
* Pack size:

Interior Trim Panel Fastener Clip Pack suitable for various Toyota models (TH0362)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 9mm hole and are a plastic push in trim clips used to fasten interior panels such as door cards, trim panels, door pillars, boot linings and pillars.

 Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

  • JZA80

Toyota MR2

  • SW20, SW21
  • ZZW30

Toyota GR Four Yaris 

  • GXPA16

Toyota Corolla

  • AE101, AE102, CE100, EE100, EE101
  • AE110, AE111, AE112, AE114, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE110, ZZE111, ZZE112
  • CDE120, NDE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
  • ZZE130
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
  • NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
  • NRE181, ZRE182 and ZWE182

Toyota Celica

  • ZZT230 and ZZT231

 Toyota Carina

  • ST160, ST162 and ST163

Toyota Corona

  • AT190, CT190, CT195, ST190, ST191, ST195
  • AT210, AT211, CT210, CT211, CT215, CT216, ST210, ST215
  • AT220, CT220 and ST220

Toyota Hilux

  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

  • FZJ71, FZJ76, FZJ78, FZJ79, GRJ71, GRJ76, GRJ78, GRJ79, HDJ79, HZJ71, HZJ76, HZJ78, HZJ79, KZJ77, LJ77, LJ79, RJ77, VDJ76, VDJ78, VDJ79
  • FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105, UZJ100
  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121, VZJ125
    GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota Soarer

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Tail Gate Board suitable for Toyota Land Cruiser J100 Series

Reproduction tail gate board for your J100 series Toyota Land Cruiser.

Suited to all Toyota Land Cruiser HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001 and HDJ1002 built between 1998 to 2007 our tail gate board is is a faithfull reproduction patterned off the OEM factory original board with Perfromer Flex carpet, are well fitting and made in Australia to the highest quality and come complete with 16 clips for installation.

Available in six different colours to suit. Just use the drop down menus to select the colour you require.

NOTE: Colour swatches shown may differ slightly due to digital imaging

Complete your 'J100 series' Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, serious off-roader or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$380.00
* Performer carpet colours:

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

Screw Mounting Grommet Clip Pack suitable for various Toyota models (TH0397)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, GT86, Hilux, Land Cruiser, Prado and Soarer.

These clips have a 16.8mm head diameter and fit to a 8.5mm square hole are a plastic push in trim clips used to fasten bumper covers, side members, side mouldings, radiator grilles and other plastic to metal body applications.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Corolla

  • NRE181, ZRE181, ZRE182 and ZWE182 (side member)

Toyota GT86

  • ZN6 (rear bumper)

Toyota Hilux

  • GUN112, KUN112, TGN110, TGN111 (radiator grille)
  • GGN120, GGN125, GUN122, GUN123, GUN125, GUN126, KUN122, KUN125, KUN126, LAN125, TGN120, TGN121, TGN126, TGN128 (radiator grille)
  • GGN135, GUN135, GUN136, KUN135, KUN136, TGN136, TGN138 (radiator grille)

Toyota Land Cruiser

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100 (hood [bonnet], fender [mudguard] and side moulding)

 Toyota Prado

  • GDJ150, GRJ150, KDJ150, LJ150, TRJ150 and TRJ155 (radio / dashboard)

Toyota Soarer

  • Z40 (side moulding)

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

1FZ-FE 5mm Ignition Lead Kit suitable for J79 and J105 Toyota Land Cruiser (TH56224)

Genuine Eagle brand 5mm ignition leads to suit your Toyota Land Cruiser fitted with a 1FZ-FE engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 1FZ-FE engine. This kit includes coil clips at various angles, correct to the OEM spec.

 Suits 4.5L 1FZ-FE DOHC Land Cruiser models as follows:

  • FZJ105 -1998 to 2006
  • FZJ79 - 1998 to 2006

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for DOHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$205.50

Screw Mounting Grommet Clip Pack suitable for various Toyota models (TH0456)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 16mm collar diameter, 18mm stem length and fit to a 10mm x 10mm square hole and are a plastic push in trim clips used to fasten bumper bars, wheel arches, splashguards, sill panels, mud flaps, fuel tanks and fuel pipes.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE95
  • AE100, AE101, AE102, AE104, CE100, CE104, EE100 and EE101

Toyota Celica

  • AT160, ST160, ST161, ST162, ST163, ST165 and ST182

 Toyota Carina

  • ST160, ST162 and ST163

Toyota Corona

  • AT150, AT151, CT150, ST150, ST151
  • ST160 and ST162

Toyota Hilux

  • RN120, RN121, VZN120, VZN130, VZN131
  • KZN130, LN130, LN135, RN130, RN131, RN135, YN130, YN135
  • KDN185, KZN185, RZN180, RZN185, VZN180, VZN185
  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

  • KDJ90, KDJ95,KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Bonnet (Hood) Weather Strip Clips Pack suitable for various Toyota models (TH0391)

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • All models from KE30 through to ZWE182

 Toyota Corona

  • All models from ST140 through to ST215

Toyota Cressida

  • All models from MX32 through to RX81

Toyota Hilux and Surf

  • All models from LN130 through to VZN185

Toyota Land Cruiser

  • All models from BJ60 through HZJ105

Toyota MR2

  • AW10 andAW11
  • ZZW30

 Toyota Supra

  • GA70, JZA70 and MA70
  • JZA80

Toyota Starlet

  • KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Door Card Side Trim Panel and Fascia Clips Pack suitable for various Toyota models (TH0379)

Door card, side trim panel and fascia fastener clip pack to suit various Toyota models - Caldina, Celica, Corolla, Corona, Supra, MR2, Soarer, Prado, Yaris, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door as well as other interior trim and fascia panels.

These are a push in clip that have a fit to a 9mm hole size and measure 12.8mm ( top head diameter), 15.6mm (centre head diameter) , 17.7mm (bottom head diameter) with a stem length of 14.2mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, CT216, ET196, ST190, ST191, ST195, ST198
  • AT211, ST210, ST215

 Toyota Celica 

  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE91, AE92, AE95, CE90, EE90
  • AE100, AE101, AE102, AE103, AE104, CE100, CE101, CE104, EE100, EE101
  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
  • CDE120, ZRE120, ZZE120, ZZE121, ZZE122 and ZZE123

 Toyota Corona

  • YT140

 Toyota Hilux

  • KDN145, LN140, LN141, LN145, LN147, RZN142, RZN144, RZN147, RZN148, RZN149
  • KDN150, KDN151, LN150, LN152,
  • KDN165, KDN166, KZN165, LN166, LN167
  • KDN170, LN170, LN171, LN172, RZN173, RZN174, VZN172
  • KDN190, KZN190, LN192 and RZN194

  Toyota Supra

  • MA61, MA63

Toyota Land Cruiser 

  • BJ60, FJ62, HJ60
  • BJ73, FJ70, FJ73, FJ75, FZJ70, FZJ71, FZJ73, FZJ74, FZJ75, FZJ78, FZJ79, HDJ78, HDJ79, HJ75, HZJ70, HZJ71, HZJ73, HZJ74, HZJ75, HZJ76, HZJ77, HZJ78, HZJ79, KZJ70, KZJ71, KZJ73, KZJ77, KZJ78, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ75, PZJ77, RJ70, RJ73, RJ77
  • FJ80, FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota MR2 

  • SW20 and SW21

Toyota Soarer

  • JZZ30, UZZ30, UZZ31 and UZZ32

Toyota Supra

  • JZA80

Toyota Yaris 

  • NCP10, NCP11, NCP12, NCP13, NLP10, SCP10
  • NCP20
  • EP80, EP81, EP82, EP85, NP80
  • EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

1FZ-FE 5mm Ignition Lead Kit suitable for J79 and J105 Toyota Land Cruiser (TH56846)

Genuine Eagle brand 5mm ignition leads to suit your Toyota Land Cruiser fitted with a 1FZ-FE engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 1FZ-FE engine. This kit includes coil clips at the same angles, correct to the OEM spec.

 Suits 4.5L 1FZ-FE DOHC Land Cruiser models as follows:

  • FZJ105 -1998 to 2006
  • FZJ79 - 1998 to 2006

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for DOHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$241.50