Spare parts suitable for Toyota Land Cruiser J50 Series

NOS and reproduction spare parts suitable for J50 series Toyota Land Cruiser models built from 1967 to 1980

ASCO Brake Booster decal suitable for various Toyota models

This decal was applied to Toyota vehicles through out the 1970's and early 1980's, and denoted the licenced use of ASCO disc brake technology by Toyota.

Complete your Toyota Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

Brake Booster Decal (ASCO Drum) suitable for Toyota Land Cruiser FJ40 FJ55

This decal was applied to both J40 and J50 series Land Cruiser, and denoted the licenced use of ASCO tehcnology by Toyota.

Complete your Land Cruiser Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

Tail Gate Emblem (4WD Black) suitable for Toyota Land Cruiser J50 series FJ55 FJ56

Complete your FJ55 restoration in style.

These tail gate badges were used on all most models built throughout the FJ55 / FJ56 production years.

Our Australian made high quality reproductions are made using precision tooling. Faithful to original specifications these will complete any project with the nicest finishing touch.

Shipping worldwide every week - so no problems for international buyers.

$75.00
Out of stock

Stop Light Lenses suitable for Toyota Land Cruiser J50 Series 1969 to 1977

Reproduction rear stop light lenses for your J50 series Toyota Land Cruiser.

Suited to all Toyota Land Cruiser late build FJ55 and FJ56 built between 1969 to 1977 these stop light lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number L1383.

These stop light lenses were fitted to the rear of the J50 series Toyota Land Cruiser on both barn door and fold-down type rear doors.

Complete your 'iron pig' or 'iron moose' J50 series Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, restoration project or even a classic off-roader!

These badges have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$80.00

F 2F 3F Engine 9mm Ignition Lead Kit suitable for J40 FJ55 J60 J70 Toyota Land Cruiser (TH9617)

Genuine Eagle brand 9mm ignition leads to suit your Toyota Land Cruiser fitted with an F, 2F or 3F engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the F, 2F and 3F engines.

Suits 3.9 F OHV Land Cruiser models as follows:

  • FJ40 - 1965 to 1974
  • FJ55 - 1965 to 1974

Suits 4.2L 2F OHV Land Cruiser models as follows:

  • FJ40 and FJ45 - 1972 to 1984
  • FJ55 - 1972 to 1980
  • FJ60 - 1980 to 1988

 Suits 4.0L 3F OHV Land Cruiser models as follows:

  • FJ62 - 1980 to 1988
  • FJ70, FJ73 and FJ75 -1985 to 1990

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHV motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$89.50

Toyo Radiator Co Decal suitable for various Toyota models

This decal was applied to all Japanese built Toyota models throughout the late 1960's to 1980.

This included modesl such as Land Cruiser (FJ40, FJ45, FJ55 etc), Hilux (RN15, RN25 etc), Crown (MS55, MS60, MS70, MS80 etc), Celica (A20 series) and Corolla (E20 and E30 series).

Complete your classic Toyota Restoration in style with this decal that is applied to the top face of the radiator adjacent to the radiator cap.

Fitted at the very top of the radiator, this decal is most visible immediately when the bonnet (hood) is opened and provides that finishing touch to a resto.

Often the original decal may have been removed when the radiator was reconditioned, replaced or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

Tail Gate Emblem (4WD Amber) suitable for Toyota Land Cruiser J50 series FJ55 FJ56

Complete your FJ55 restoration in style.

These tail gate badges were mostly used on barn door type builds in the late years of FJ55 / FJ56 production.

Our Australian made high quality reproductions are made using precision tooling. Faithful to original specifications these will complete any project with the nicest finishing touch.

Shipping worldwide every week - so no problems for international buyers.

$75.00
Out of stock

Tail Lamp Lenses suitable for Land Cruiser FJ55 1971 to 1977

Perfect for your FJ55 Toyota Landcruiser restoration project - complete your project nicely.

This is a pair of lenses complete with diffusers and suits FJ55 Land Cruisers built between 1971 to 1977.

Available in USDM all red and JDM/Rest of World red-amber.

NOS is no longer available for these lenses.

Replaces Koito FJ2-R (right side) and FJ2-L (left side)

These are a high quality faithful reproduction unit using precision tooling and molding techniques.

Worldwide shipping weekly - no problems for overseas buyers.

$165.00
Out of stock
* usdm or jdm-rest of world:

F Engine Build Plate suitable for Toyota Land Cruiser Bus and Truck

Complete your early Toyota restoration project in style with a reproduction F engine build plate for your Toyota Land Cruiser, Toyota Dyna or Toyota Coaster.

These 'F' engine Build Plates were fitted in the engine bay of Toyota Landcruiser FJ40, FJ45, FJ47 and FJ60 built up to 1988 (start year can vary in each geographical market) and were also fitted to other models such as Toyota Bus FB and Toyota Truck FA, FC, FQ15, FX and FZ.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail.

The pricing includes having your car's data applied to the plate before we ship it to you.

Select F or 2F engine build plate using the drop down menu.

We ship globally to all countries weekly.

$80.00
* engine model:

Air Cleaner Service Decal suitable for Toyota Land Cruiser J40 and J50 series

This decal was applied to both J40 and J50 series Land Cruiser, and denoted the servicing requirements for the air filter cartridge.

Applied to the arm of the air cleaner assembly, these decals are correct in every detail and finish your restoration to concourse levels!

Fitted at the very top of the arm, this decal is most visible immediately when the bonnet (hood) is opened. Decal measures 125mm x 32mm.

Often the original decal may have been removed or simply fallen off. 

Available only from Toyota Heritage.

We ship worldwide every week - no problems for international buyers.

$7.50

Tail Gate Emblem (Block) suitable for Toyota Land Cruiser J50 series J55

Reproduction "TOYOTA" tail gate badges for your J50 series Toyota Land Cruiser. 

Suited to all Toyota Land Cruiser late build FJ55 and FJ56 built between 1976 to 1980 these tail gate badges are faithful reproductions made in Australia to the highest quality and replace original part numbers 75367-90351, 75367-90352 and 75431-89801.

These tail gate badges were fitted to the tail gate of the J50 series Toyota Land Cruiser on both barn door and fold-down type rear doors.

Complete your 'iron pig' or 'iron moose' J50 series Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, restoration project or even a classic off-roader!

These badges have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers. 

$65.00

Reverse (Back-up) Lamp Lenses suitable for Toyota Land Cruiser FJ55 1974 to 1978

Reproduction back-up (reversing) lamp lenses for your J50 series Toyota Land Cruiser.

Suited to all Toyota Land Cruiser mid build FJ55 FJ55V or FJ56 built between 1974 to 1978 these mounts are faithful reproductions made in Australia to the highest quality and replace original IKI part numbers 21-7L (left) and 21-7R (right).

Complete your 'iron pig' (aka 'iron moose') Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, restoration project or serious off-roader!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$90.00

Brake Booster Decal (Bendix) suitable for Toyota Land Cruiser J40 and J50 series

This decal was applied to both J40 and J50 series Land Cruiser, and denoted the licenced use of Bendix tehcnology by Toyota.

Complete your Land Cruiser Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

Roof Vent Interior Louvre Cover suitable for Toyota Land Cruiser and Toyota Hilux

Reproduction interior vent covers to suit J40 and J50 series Toyota Land Cruiser as well as first and second generation Toyota Hilux 

Available in black or silver - simply use the drop down menu to select. Replacing original part number 62931-89102 these louvres were the interior trim piece to the roof ventilation system and were fitted to the following models and installed as follows:

J40 series Toyota Land Cruiser - vertically and fitted to the B-pillar of pick up model FJ45 Toyota Land Cruiser and in the rear cargo area of FJ40 and BJ40 Toyota Land Cruiser.

J50 series Toyota Land Cruiser - horizontally and fitted to the rear cargo area of FJ55, FJ56 and FJ55V Toyota Land Cruiser.

N10 series Hilux - vertically and fitted to the B-pillar of pick up models RN10 and RN15 Toyota Hilux

N20 series Hilux - vertically and fitted to the B-pillar of pick up models RN20, RN25 and early versions of RN22 Toyota Hilux

Complete your 'old school' Toyota Land Cruiser or Toyota Hilux project in style - whether its a retro-ride, daily driver, restoration project or shop truck!

These louvres have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$65.00
* black or silver:

Interior Lamp Dome Lens suitable for Toyota Land Cruiser FJ55

Reproduction interior light dome lens for your J50 series Toyota Land Cruiser.

Suited to all Toyota Land Cruiser earlt to mid build FJ55 FJ55V or FJ56 built between 1967 to 1978 these domes are faithful reproductions made in Australia to the highest quality.

Complete your 'iron pig' (aka 'iron moose') Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, restoration project or serious off-roader!

These dome lenses have been manufactured using precision tooling to produce a high quality faithful reproduction.

Shipping worldwide weekly - no problems for overseas buyers.

$50.00

Stop Light Back Body suitable for Toyota Land Cruiser FJ55 1967 to 1980

Pair of J50 series Toyota Landcrusier stop light back body (1967 to 1980)

Suits all FJ55G and FJ55V variants with the round stop light. May suit some FJ56 variants.

Original back bodies often disintegrate when being removed for vehicle restoration. This item replaces those you may have crushed.

Complete your restoration project with these high quality faithful reproduction items. Has correct beaded edge on outward facing surface for placement of seal and lense.

These have been made using the highest precision techniques and are UV stable.

Shipping worldwide weekly - no problems for overseas buyers.

$65.00

Fender Mounted Clearance Lamp Lenses suitable for Toyota Land Cruiser J40 Series and J50 series

Reproduction front parker light lenses to suit your J40 series or J50 series Toyota Land Cruiser built between 1968 and 1974.

Suited to FJ40, FJ45, FJ45V, FJ45B and FJ55 Toyota Land Cruiser models these lenses have been made in Australia to the highest quality and replace Koito original part 210-33453.

Available in clear or amber these lenses were fitted to the fender (mudguard) mounted lamps.

Toyota Heritage are the only supplier globally of this lens in clear. To select either clear or amber use the drop down menu.

Sold as a pair they will complete your J40 series or J50 series Toyota Land Cruiser project in style - whether its a retro-ride daily driver, restoration project or offroad escape machine!

Shipping worldwide weekly - no problems for overseas buyers.

$95.00
* lense colour options:

Moulded Carpet suitable for Toyota Land Cruiser FJ55 1972 to 1980

Front and rear moulded floor carpet for J50 series Toyota Land Cruiser - add a touch of comfort and luxury to your Land Cruiser.

Suited to all Toyota Land Cruiser FJ55 and FJ56  built between 1972 to 1980 our moulded carpets are well fitting and made in Australia to the highest quality and replace original parts 58511-90361 (front mat) and 58551-90351 (rear mat).

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

Avialable in Right Hand Drive (RHD) and Left Hand Drive (LHD) - simply use the drop down menu to select.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'J50 series' Toyota Land Cruiser project in style and with added comfort - whether its a retro-ride, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$240.00
* Carpet Colour:

* Carpet Pile:

* Driver Side:

Fender Mount for Indicator Assembly suitable for Toyota Land Cruiser FJ55

Reproduction fender lamp mounts for your J50 series Toyota Land Cruiser. 

Suited to all Toyota Land Cruiser mid and late build FJ55 FJ55V or FJ56  built between 1974 to 1980 these mounts are faithful reproductions made in Australia to the highest quality and have the correct 'tab' for the indicator unit to site facing squarely forward and at the correct angle.

Complete your 'iron pig' (aka 'iron moose') Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, restoration project or serious off-roader!

These mounts have been manufactured using precision tooling to produce a high quality faithful reproduction item and are finished in grey so buyers may paint them to suit their project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$75.00

Tail Lamp Lenses suitable for Toyota Land Cruiser FJ55 1967 to 1970

Reproduction tail light lenses for your J50 series Toyota Land Cruiser.

Suited to all Toyota Land Cruiser early build FJ55 built between 1967 to 1970 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number L1804L (left side) and L1804R (right side).

These lenses were fitted to the rear quarter panel ends beside the tail gate of the Toyota Land Cruiser and NOS are no longer available for these lenses.

Complete your 'iron pig' (or 'iron moose') Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, restoration project, shop truck or even a serious offroader!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$195.00