Spare parts suitable for Toyota Land Cruiser J60 Series

NOS and reproduction spare parts suitable for all J60 series Toyota Land Cruiser models built from 1980 to 1989

ASCO Brake Booster decal suitable for various Toyota models

This decal was applied to Toyota vehicles through out the 1970's and early 1980's, and denoted the licenced use of ASCO disc brake technology by Toyota.

Complete your Toyota Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

Cargo Area Marine Carpet Mat suitable for Toyota Land Cruiser J60 Series

Rear cargo area marine grade carpet for your J60 series Toyota Land Cruiser.

Suited to all Toyota Land Cruiser BJ60, FJ60, FJ61, FJ62, HJ60 and HJ61 built between 1980 to 1990 our mats is styled off the OEM factory original mat, is well fitting and made in Australia to the highest quality with a foam backing for added luxury.

Displayed here in  Teak with black stripe and a black edge binding, this mat provides a look that has is a real 1980's feel, fits in well with OEM interiors and can be easily fitted installed into the cargo area in your 60 series Toyota Land Cruiser.

Available in four different striped colour arrangements and you can chose to have the stripes horizontal or vertical. Just use the drop down menus to select stripe colour and orientation.

Complete your '60 series' Toyota Land Cruiser project in style - whether its a daily driver, offroader or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$210.00
* Stripe Orientation:

* Striped carpet:

* Edge Binding Colour:

3FE Engine 9mm Ignition Lead Kit suitable for Toyota Land Cruiser J60 and J80 series (TH96859)

Genuine Eagle brand 9mm ignition leads to suit your Toyota Land Cruiser fitted with a 3F-E engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 3F-E engine.

 Suits 4.0L 3F-E OHV Land Cruiser models as follows:

  • FJ60 - 1985 to 1990
  • FJ80 -1990 to 1992

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHV motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$96.50

Bonnet (Hood) Weather Strip Clips Pack suitable for various Toyota models (TH0391)

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • All models from KE30 through to ZWE182

 Toyota Corona

  • All models from ST140 through to ST215

Toyota Cressida

  • All models from MX32 through to RX81

Toyota Hilux and Surf

  • All models from LN130 through to VZN185

Toyota Land Cruiser

  • All models from BJ60 through HZJ105

Toyota MR2

  • AW10 andAW11
  • ZZW30

 Toyota Supra

  • GA70, JZA70 and MA70
  • JZA80

Toyota Starlet

  • KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

F 2F 3F Engine 9mm Ignition Lead Kit suitable for J40 FJ55 J60 J70 Toyota Land Cruiser (TH9617)

Genuine Eagle brand 9mm ignition leads to suit your Toyota Land Cruiser fitted with an F, 2F or 3F engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the F, 2F and 3F engines.

Suits 3.9 F OHV Land Cruiser models as follows:

  • FJ40 - 1965 to 1974
  • FJ55 - 1965 to 1974

Suits 4.2L 2F OHV Land Cruiser models as follows:

  • FJ40 and FJ45 - 1972 to 1984
  • FJ55 - 1972 to 1980
  • FJ60 - 1980 to 1988

 Suits 4.0L 3F OHV Land Cruiser models as follows:

  • FJ62 - 1980 to 1988
  • FJ70, FJ73 and FJ75 -1985 to 1990

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHV motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$89.50

Floor Mat Set suitable for Toyota Land Cruiser J60 Series

Front and rear floor carpet set for your J60 series Toyota Land Cruiser.

Suited to all RHD manual Toyota Land Cruiser BJ60, FJ60, FJ61, FJ62, HJ60 and HJ61 built between 1980 to 1990 our carpet floor mats are styled off the OEM factory original mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats inlcuded in the set and this includes the two front foot well mats, a single mat for the rear seat and a mat that sits over the transmission tunnel at the gear selectors.

Displayed here in Buckskin with a grey edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your '60 series' Toyota Land Cruiser project in style - whether its a daily driver, offroader or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$170.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Push Fit Plastic Rivet Clip 8mm suitable for various Toyota models (TH0005 33A)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina and  MR2.

These clips have a 16mm head diameter, 11mm fitted length and fit to a 8mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Available in Black or Grey - use the second drop down menu to select.

Suits the following models:

Toyota MR2

  • AW11
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L
  • CDE120, NDE120, ZZE120 and ZZE121

Toyota Carina

  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • BJ60, BJ61, FJ60, FJ62, HJ60 and HJ61

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

* Product Colour:

Bonnet (Hood) Support Rod Clamp suitable for various Toyota models (TH0460)

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

  • CV10, CV11, SV10, SV11, SV12
  • MCV20, MCV21, SXV20, SXV23, SXV25
  • MCV36, ACV36
  • ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

  • TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
  • AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
  • AT160, ST160, ST161, ST162, ST163, ST165
  • AT180, ST182, ST183, ST184, ST185
  • AT200, ST202, ST203, ST204, ST205
  • ZZT230 and ZZT231 

Toyota Corona

  • RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
  • RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
  • AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
  • T160, T170, T190 series
  • T200, T210, T220 series

Toyota Cressida

  • RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
  • X60, X70 and X80 series

Toyota Carina

  • A10, A40, A60 series
  • T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

  • KE30, KE35, KE38, KE55, TE55, TE37
  • KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
  •  AE80, EE80, AE81 AE85, AE82, AE86, CE80
  • AE90, AE92, AE93, AE94, AE95, AE96
  • AE101, AE111, AE112
  • ZRE120
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

  • RN10, RN15
  • RN20, RN25
  • RN30, RN35, RN40, RN45
  • RN50, RN60, YN60, LN60, RN70, YN70, LN70
  • N80, N90, N100, N110 series
  • N120 series
  • N130 series
  • N140 series

Toyota Land Cruiser 

  • FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
  • FJ55, FJ55G, FJ55V, FJ56
  • FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
  • FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
  • HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

  • J90, J120 and J150 series

Toyota Starlet

  • KP60, KP61, KP62
  • P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$7.50
* Pack size:

Door Card Trim Panel Clips Pack suitable for various Toyota models (TH0176)

Door card fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Supra, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door.

These are a push in clip that have a fit to a 9mm hole and have a T1 13mm head diameter with a stem length of 14mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica 

  • AA63, GA61, RA60, RA61, RA63, RA64, RA65, SA60, SA63, TA60, TA61, TA63, TA64
  • AT160, ST160, ST161, ST162, ST163, ST165 
  • AT180, ST182, ST183, ST184 and ST185

Toyota Corolla

  • KE30, KE35, KE36, KE38, TE31, TE37, TE38
  • TE47
  • KE50, KE55, TE51,
  • AE70, AE71, CE70, CE71, CE72, KE70, KE71, KE72, KE73, KE74, TE70, TE71, TE72, TE73, TE74
  • AE80, AE81, AE82, AE85, AE86, CE80, EE80

 Toyota Corona

  • AT140, AT141, CT140, CT141, CT147, KT147, RT141, ST140, TT142, TT147, YT140

 Toyota Hilux

  • LN50, LN51, LN55, LN56, LN57, RN50, RN55, RN58, YN50, YN51, YN52, YN55, YN56, YN57, YN58
    LN60, LN61, LN65, RN60, RN61, RN66, RN67, VZN61, VZN66, YN60, YN61G, YN61V, YN62, YN63, YN65, YN67
    RN70, RN75

 Toyota Supra

  • MA61, MA63

Toyota Land Cruiser 

  • BJ40, BJ41, BJ42, BJ44, BJ45, BJ46, FJ40, FJ45, HJ47
  • BJ60, BJ61, FJ60, FJ61, FJ62, FJ62G, FJ62V, HJ60, HJ61
  • BJ70, BJ71, BJ73, BJ74, BJ75, FJ70, FJ73, FJ75, HJ75, LJ75, LJ70, LJ71, LJ73, RJ70, RJ73 

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Rear Seat Carpet suitable for Toyota Land Cruiser J60 Series

Rear seat carpet for your J60 series Toyota Land Cruiser.

Suited to all Toyota Land Cruiser BJ60, FJ60, FJ61, FJ62, HJ60 and HJ61 built between 1980 to 1990 our mats is styled off the OEM factory original mat, is well fitting and made in Australia to the highest quality with a foam backing for added luxury.

Displayed here in Buckskin with a grey edge binding, this mat provides a look that has an OEM look and feel and can be easily fitted to the back panel of the rear seat in your 60 series Toyota Land Cruiser.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your '60 series' Toyota Land Cruiser project in style - whether its a daily driver, offroader or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$120.00
* Carpet Pile:

* Carpet Colour:

Push Fit Plastic Rivet Clip 6.5mm suitable for various Toyota models (TH0372)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser and  MR2.

These clips have a 15mm head diameter, 12mm fitted length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • AW11L
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
  • AE101, AE102, CE100, EE100, EE101
  • WZE110, ZZE111 and ZZE112

Toyota Carina

  • ST170G
  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • FJ62, FJ62G, FJ62V, BJ60, BJ61, FJ60, HJ60 and HJ61

Toyota Hilux and Surf

  • LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, YN90, YN92
  • LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
  • LN110, LN112, RN110, YN110
  • RN125
  • KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
  • KDN150, LN152, LN155, RZN152, RZN154
  • KDN165, KZN165, RZN168, RZN169, VZN167
  • KDN170, LN171, LN172, RZN174, VZN172
  • KDN190, LN191, RZN193
  • LN200, RZN200
  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • ST171, CT176, ET176, ST171
  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Door Card Side Trim Panel and Fascia Clips Pack suitable for various Toyota models (TH0379)

Door card, side trim panel and fascia fastener clip pack to suit various Toyota models - Caldina, Celica, Corolla, Corona, Supra, MR2, Soarer, Prado, Yaris, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door as well as other interior trim and fascia panels.

These are a push in clip that have a fit to a 9mm hole size and measure 12.8mm ( top head diameter), 15.6mm (centre head diameter) , 17.7mm (bottom head diameter) with a stem length of 14.2mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, CT216, ET196, ST190, ST191, ST195, ST198
  • AT211, ST210, ST215

 Toyota Celica 

  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE91, AE92, AE95, CE90, EE90
  • AE100, AE101, AE102, AE103, AE104, CE100, CE101, CE104, EE100, EE101
  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
  • CDE120, ZRE120, ZZE120, ZZE121, ZZE122 and ZZE123

 Toyota Corona

  • YT140

 Toyota Hilux

  • KDN145, LN140, LN141, LN145, LN147, RZN142, RZN144, RZN147, RZN148, RZN149
  • KDN150, KDN151, LN150, LN152,
  • KDN165, KDN166, KZN165, LN166, LN167
  • KDN170, LN170, LN171, LN172, RZN173, RZN174, VZN172
  • KDN190, KZN190, LN192 and RZN194

  Toyota Supra

  • MA61, MA63

Toyota Land Cruiser 

  • BJ60, FJ62, HJ60
  • BJ73, FJ70, FJ73, FJ75, FZJ70, FZJ71, FZJ73, FZJ74, FZJ75, FZJ78, FZJ79, HDJ78, HDJ79, HJ75, HZJ70, HZJ71, HZJ73, HZJ74, HZJ75, HZJ76, HZJ77, HZJ78, HZJ79, KZJ70, KZJ71, KZJ73, KZJ77, KZJ78, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ75, PZJ77, RJ70, RJ73, RJ77
  • FJ80, FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota MR2 

  • SW20 and SW21

Toyota Soarer

  • JZZ30, UZZ30, UZZ31 and UZZ32

Toyota Supra

  • JZA80

Toyota Yaris 

  • NCP10, NCP11, NCP12, NCP13, NLP10, SCP10
  • NCP20
  • EP80, EP81, EP82, EP85, NP80
  • EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

H Engine Build Plate suitable for Toyota Land Cruiser Coaster Dyna

Complete your early Toyota restoration project in style with a reproduction H engine build plate for your Toyota Land Cruiser, Toyota Dyna or Toyota Coaster.

These 'H' engine Build Plates were fitted in the engine bay of Toyota Landcruiser HJ45, HJ47 and HJ60 built up to 1985 (start year can vary in each geographical market). and were also fitted to other models such as Toyota Dyna HU10 and Toyota Coaster.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

Select H or 2H engine or HJ45 build plate using the drop down menu.

We ship globally to all countries weekly.

$80.00
* engine model:

OEM Side Marker Lamps OEM suitable for Toyota Land Cruiser J60 series

Pair of brand new genuine OEM side marker lights.
Complete with housing, lense and wiring.
OEM part number: 81730-89108
Koito number: 14-63L
Complete your J60 series Land Cruier in style - Why bother with used parts when you can have genuine lenses.
Easy to install.
Worldwide shipping available - no problems for overseas buyers.

$150.00
1 In Stock

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00