Spare parts suitable for Toyota Celica A40 A50 Series

NOS and reproduction spare parts suitable for Toyota Celica A40 A50 series second first generation models built from 1978 to 1981

ASCO Brake Booster decal suitable for various Toyota models

This decal was applied to Toyota vehicles through out the 1970's and early 1980's, and denoted the licenced use of ASCO disc brake technology by Toyota.

Complete your Toyota Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

2TG 8mm Ignition Lead Kit suitable for Toyota Celica Carina Corolla (TH84169)

Genuine Eagle brand 8mm ignition leads to suit your Toyota Celica, Toyota Corona or Toyota Carina fitted with an 18RG engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 2TG engines.

Suits 2.0L 2TG DOHC GT1600 (Celica and Carina) and Levin or Trueno (Corolla) models as follows:

  • Celica - TA23, TA27, TA28, TA40, TA45, TA60 and TA61
  • Carina - TA12, TA17, TA40, TA45 and TA60 
  • Corolla - TE21, TE27, TE28, TE37, TE51 and TE71 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$85.00

Front Corner Lamp Lenses suitable for Toyota Celica A40 1977 to 1979

Reproduction front corner indicator parker lenses to suit your second generation A40 Toyota Celica series A (round headlights).

Suited to all TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA46, RA42 and RA43 Toyota Celica built between 1977 to 1979 these lenses have been made in Australia to the highest quality and replace Koito original product number Koito 14-61L (left side) and 14-61R (right side).

These lenses are fitted to the eraly build second generation A40 Celica with round headlights and are fitted to the front corner of the mud-guard (fender)..

Complete your 'old school' Toyota Celica project in style - whether its a retro-ride, drift car, street driver, restoration project or even race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$115.00
lense colour options:

Bonnet (Hood) Weather Strip Clips Pack suitable for various Toyota models (TH0391)

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • All models from KE30 through to ZWE182

 Toyota Corona

  • All models from ST140 through to ST215

Toyota Cressida

  • All models from MX32 through to RX81

Toyota Hilux and Surf

  • All models from LN130 through to VZN185

Toyota Land Cruiser

  • All models from BJ60 through HZJ105

Toyota MR2

  • AW10 andAW11
  • ZZW30

 Toyota Supra

  • GA70, JZA70 and MA70
  • JZA80

Toyota Starlet

  • KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

2T Engine Build Plate suitable for Toyota Celica Corona Carina

Available for Toyota models with 2T engines and with one of two transmissions - 5F1 and T50 (select in drop down box)

Suits T engined models as follows:

  • Toyota Celica TA22 and TA40
  • Toyota Corona TT100, TT106V, TT110 and TT120 and
  • Toyota Carina TA60 and TA61

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

Shipping worldwide weekly - no problems for overseas buyers.

$80.00
* engine model:

Floor Mat Set suitable for Toyota Celica A40 and A50 Series

Front and rear floor carpet set for your second generation Toyota Celica or first generation Toyota Supra A40 and A50 series.

Suited to all RHD Toyota Celica and Toyorta Supra built between 1977 to 1981 our carpet floor mats are patterned off the OEM factory original mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

These mats will fit the following models:

Toyota Celica

  • TA40, TA41, TA42, TA45, TA46, TA47
  • RA40, RA42, RA43, RA45, RA46 and RA55

Toyota Supra (also known as Celica Supra and Celica XX)

  • MA45, MA46, MA47, MA55 and MA56

There are five mats included in the set and this includes the two front foot well mats, two rear floor well mats and a mat that sits over the transmission tunnel in front of rear seat.

Displayed here in Spindrift loop pile with a grey edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'second gen' Toyota Celica or first generation Toyota Supra project in style - whether its a daily driver, offroader or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$160.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Moulded Carpet suitable for Toyota Celica A40 and A50 series

Front and rear moulded floor carpet for your second generation A40 series or A50 series Toyota Celica. 

Suited to all Toyota Celica A40 or A50 series built between 1977 to 1981 our moulded carpets are well fitting and made in Australia to the highest quality and replace original parts 58510-14390 (front carpet) and 58540-14110 (rear carpet).

Suits all lift-back and coupe models in the series including TA40 TA45 TA41 TA42 TA46 TA47 RA40 RA45 RA46 RA42 RA43 MA45 MA46 MA47 MA55 and MA56

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'second gen' Toyota Celica project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$240.00
* Carpet Colour:

* Carpet Pile:

Manifold suitable for Toyota 18RG Engine with 2 x 45DCOE Weber (2)

Upgrade your engine performance with this side draft manifold suitable for Toyota 18RG twin cam engines, including 18RG, 18R-GU and 18R-GEU Engines

This genuine Redline intake manifold is designed to fit two DCOE Weber Carbs (45DCOE) and will the following models:

Toyota Celica GT

  • RA23, RA25, RA28
  • RA40, RA45, RA55
  • RA63

Toyota Carina GT

  • RA15, RA17, RA30
  • RA40, RA45, RA55
  • RA63

Toyota Corona GT

  • RT132
  • RT141

Toyota Camry Celica GT

  • RA55

These Australian made high quality manifolds are made using highly developed casting and precision tooling. Made to match original specifications for mounting these will complete any project and add performance.

Koromo Heritage is also able to supply ancilliary items for fitments such as studs, gaskets and spacers as well as carburettors and airfilter assemblies - please email This email address is being protected from spambots. You need JavaScript enabled to view it. to enquire.

Shipping worldwide every week - so no problems for international buyers.

$380.00

2T-G 2TG-R Valve Clearance decal suitable for Toyota Celica Corolla Carina

Reproduction valve clearance decal for Toyota models with 2T-G and 2T-GR engines.

Suits 2T-G and 2T-GR  engined models as follows:

  • Toyota Celica TA22, TA40, TA45, TA60 and TA61
  • Toyota Corolla TE21, TE27, TE31, TE37, TE51 and TE71
  • Toyota Carina TA12 and TA17

These decals were fitted to the air plenum from the factory and provided instructions for valve clearances and other data such as air filter element change out.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$10.00

Inner Guard (Fender) Fastener Clip Pack suitable for various Toyota models (TH0385)

Inner guard (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Camry, MR2, Carina, Caldina

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

 Toyota MR2

  • AW10 and AW11
  • SW20 and SW21
  • ZZW30

Toyota GR Four Yaris

  • GXPA16

Toyota Corolla

  • AE81, AE82, AE85 and AE86
  • AE90, AE92, AE93, AE94, AE95 and AE96
  • AE101, AE102 and AE112 

 Toyota Camry

  • SV10, SV11, SV12, CV10 and CV11
  • SV20, SV21 and SV22

Toyota Caldina 

  • ST191, ST195 and ST198

 Toyota Carina

  • TA40, TA41, TA42, TA47, TA57, RA40, RA45, RA46, RA55 and RA56
  • AA60, KA67V, AA63, TA60, TA61, TA67V, TA62, TA63, RA63, CA60 and CA67V
  • ST162
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V
  • AT192, AT190, AT191, ST190, ST195, CT190 and CT195
  • AAT212, AT210, AT211, ST210, ST215, CT210, CT215, CT211 and CT216

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$25.00
* Pack size:

2T-GEU and 18R-GEU Valve Clearance decal suitable for Toyota Celica Corolla and Carina

Reproduction valce clearance decal for all Toyota models with 2T-GEU or 18R-GEU engines.

These decals are suited to the following Toyota models fitted with the 2T-GEU engine:

  • Toyota Celica TA40 and TA45
  • Toyota Corolla TE71
  • Toyota Carina TA40, TA45 and TA60

These decals are suited to the following Toyota models fitted with the 18R-GEU engine:

  • Toyota Celica GT Rally RA40, RA45 and RA55
  • Toyota Corona 2000GT RT132
  • Toyota Carina RA40, RA45, RA55 and RA60

You may find that your original decal is missing or your original decal may faded and is no longer legible.

The decal was used to inform owners and mechanics of the valve clearances required by these engines along with other servicing details.

Our reproduction part is exacting in every detail. 

We ship globally to all countries weekly. No problems for overseas buyers.

$12.00

Long Wheel Stud Kit suitable for Toyota Four Stud Hub

Suited to Toyota vehicles using four OEM wheel studs per hub.

Ensure good engineering practice with wheel studs that provide for proper engagement of wheel nuts with these longer than standard M12 1.5 pitch 72mm wheel studs.

Good engineering (safety) practice requires wheel nut engagement of the wheel stud to be the equivalent of the wheel stud diameter - 12mm for all Toyota models.

On a 1.5 pitch this means that your wheel nut must get at least 8 turns to ensure a safe and proper engagement.

Please check with us prior to purchase (This email address is being protected from spambots. You need JavaScript enabled to view it.) if your vehicle has been fitted with aftermarket hubs.

Toyota Heritage's long wheel stud kits provide enough length for proper engagement. Our open ended wheel nuts mean that they may also be used with a wide range of aftermarket and factory mag wheels.

Toyota Heritage offers four different wheel stud kits:

  • Kit 1 - Wheel studs only
  • Kit 2 - Wheel studs with wheel nuts suited to factory mag wheels
  • Kit 3 - Wheel studs with wheel nuts suited to after market mag wheels
  • Kit 4 - Wheel studs with wheel nuts suited to factory and after market mag wheels

Application:

Kit 1 (Stud Pack)

  • 16 pieces (wheel studs) in the kit
  • Perfect for when you have purchased after market mag wheels but you are not getting 8 turns of the wheel nuts the vendor supplied

Kit 2 (Factory Pack)

  • 32 pieces in the kit including studs and open-end flat seat wheel nuts with captive washers
  • Perfect for use with factory mag weels and using a wheel spacer up to 30mm to create offset to suit your handling set-up

Kit 3 (Aftermarket Pack)

  • 32 pieces in the kit including studs and open-end tapered seat wheel nuts
  • Perfect for use with almost any aftermarket mag wheel requiring a tapered seat wheel nut

Kit 4 (Track Pack)

  • 48 pieces in the kit including studs and open-end tapered seat wheel nuts plus open-end flat seat wheel nuts with captive washers
  • Perfect for the person who wants to run factory mag wheels around the streets and then switch to their track day wheels and tyres at the track

 

 

$93.60
* Pack Type:

18R Engine Build Plate suitable for Toyota Celica Corona Mark ii Hilux

Available for Toyota models with 18R or 18RC engines (select from drop down box).

These plates suit various Toyota models including:

  • Toyota Celica RA20, RA21 and RA22 (18R engine)
  • Toyota Celica RA23, RA24, RA25, RA28, RA29, RA40, RA45 and RA55 (18R-C engine)
  • Toyota Corona RT85, RT95, RT89V, RT104, RT114, RT118, RT122 and RT132 (18R engine)
  • Toyota Corona RT132 (18R-C engine)
  • Toyota Mark ii RX12, RX22, RX28, RX30, RX32, RX35, RT63, RT73, RT78 and RT79 (18R-C engine)
  • Toyota Hilux RN22 and RN27 (18R engine)

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly. No problems for overseas buyers.

$80.00
* engine model:

Head Lamp and Grille Fastener Clip Pack suitable for various Toyota models (TH0330)

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

  • KE10, KE11, KE15, KE16, KE17 and KE18
  • KE20, KE25, TE21, TE25, TE27 and TE26
  • KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
  • TE72
  • AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

  • FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

  • KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

  • TA10
  • KA67
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

  • TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
  • TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

  • All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Front Fender Side Marker Lenses suitable for Toyota Celica GT A40 series

Reproduction front fender side marker lenses for your second generation A40 series or A50 series Toyota Celica GT or Toyota Celica GTV. 

Suited to all Toyota Celica GT and GTV such as RA40GT, RA45GT, RA55GT, TA40GT, TA45GT and Celica XX MA45 and MA55 built between 1977 to 1981 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part 14-63L (left side) and 14-63R (right side).

These lenses were are fitted to the fender (mud guard) of the Celica GT, Celica GTV and Celica XX liftback and coupe variants in both Series A (round headlights) and Series B (rectangular headlights). 

Select from custom clear or factory amber lenses - simply use the drop-down menu to select.

Complete your 'second gen' Toyota Celica project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$70.00
* lense colour options:

18RG 8mm Ignition Lead Kit suitable for Toyota Celica Corona Carina (TH84168)

Genuine Eagle brand 8mm ignition leads to suit your Toyota Celica, Toyota Corona or Toyota Carina fitted with an 18RG engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 18RG engines.

Suits 2.0L 18RG DOHC GT2000 models as follows:

  • Celica - RA25, RA28, RA40, RA45, RA50 and RA63
  • Corona - RT132 and RT141,
  • Carina - RA15, RA17, RA30, RA40, RA45, RA55, and RA63

 NOTE: Carina models were not delivered new to the Australian market but you may own a private import. These models were mostly delivered domestically in Japan plus other foreign markets such as New Zealand, Europe, North America and the Middle East. 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$85.00

Front Corner Lamp Lenses suitable for Toyota Celica A40 Series 1979 to 1981

Complete your second generation A40 or A50 Toyota Celica series B project in style!

Pair of corner parker lamp lenses for the late build A40 series Toyota Celica (1979-1981). Suits all early builds of TA40 TA45 TA41 TA42 TA46 TA47 RA40 RA45 RA46 RA42 RA43 MA45 MA46 MA47 MA55 and MA56

These lenses are reproductions are Australian made using the highest quality tooling and are faithful reproductions.

Replaces original parts Koito 14-87L (left side) and 14-87R (right side) and are fitted to the front corner of the mud-guard (fender).

Available in clear or amber - simply use the drop down menu to select yoru required lense colour.

Look great on a vintage restoration project, retro ride, drift mobile or just an every day driver.

Shipping worldwide every week - no problems for international buyers.

$115.00
* lense colour options:

Plastic 8.5mm Screw Grommet Pack suitable for various Toyota models (TH0397)

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Land Cruiser, Hilux, Prado, FT86 and Soarer

These clips are used to fasten grilles, side mouldings, are screwed, bonnet linings and inner fenders into place. 

The grommet is pushed in to fit in an 8.5mm square hole, to allow screw fastening. Head diameter is 16.8mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica (radiator grille)

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43

Toyota Corolla (side member)

  • NRE181, ZRE181, ZRE182 and ZWE182

 Toyota Land Cruiser (bonnet/hood lining, front fender and side mouldings)

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado (radio reciever and amplifier)

  • GDJ150, GRJ150, KDJ150, LJ150, TRJ150 and TRJ155

 Toyota Hilux and Surf (front grille)

  • TGN110, TGN111, GUN112, KUN112
    GGN120, TGN120, TGN121, GUN122, KUN122, GUN123, GUN125, KUN125, LAN125, KUN126, GUN126, GGN125, TGN126 andTGN128
    GGN135, GUN135, KUN135, GUN136, KUN136, TGN136 and TGN138

Toyota Soarer (side moulding)

  • UZZ40

 FT86 (rear bumper stay)

  • GRMN86

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Side Marker Lenses suitable for Toyota Celica A40 and A50 Second Gen Series B

Reproduction side marker lenses for your second generation A40 series or A50 series Toyota Celica. 

Suited to all Toyota Celica late build A40 or A50 series built between 1979 to 1981 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part Koito 14-64L (left side) and 14-64R (right side). 

Suits all late builds of TA40 TA45 TA41 TA42 TA46 TA47 RA40 RA45 RA46 RA42 RA43 MA45 MA46 MA47 MA55 and MA56

These lenses were fitted to the front corner of the mud-guard (fender) of the coupe and liftback variants of the Toyota Celica with the 'square' headlights.

Available in original amber or custom clear - simply to use the drop down menu to select.

Complete your 'second gen' Toyota Celica project in style - whether its a retro-ride, drift car, street driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$85.00
* lense colour options: