Spare parts suitable for Toyota Corolla and Sprinter E10 Series

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

• KE10, KE11, KE15, KE16, KE17 and KE18
• KE20, KE25, TE21, TE25, TE27 and TE26
• KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
• TE72
• AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

• FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

• KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

• TA10
• KA67
• ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

• TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
• TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

• All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction front parker lenses in clear for your first generation E10 series Corolla or Sprinter.

Suited to all Toyota Corolla and Toyota Sprinter early build KE10, KE11, KE15, KE16, KE17 or KE18 built between 1966 to 1968 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part L2273. 

These lenses were fitted to the front valance panel of the Toyota Corolla and Toyota Sprinter that have front bumpers with a straight bottom edge (no indent to go over the parker lamp).

Complete your 'first gen' Toyota Corolla or Toyota Sprinter project in style - whether its a retro-ride, drift car, street driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Also available in amber - please see separate listing.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction tail light lenses for your first generation E10 series Toyota Corolla.

Suited to all Toyota Corolla KE10, KE10SL  and KE11 built between 1966 to 1968 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number L2377 (indicator), L2186 (reflector) and L2376 (stop and tail light).

These lenses were fitted to the rear panel of the two door and four door sedan varaints of the Toyota Corolla and are the same on SL and non SL variants.

The red-amber-clear units are suited to the Japanese Domestic Market ('JDM') and Australian Market which included New Zealand and other South West Pacific nations (eg PNG).

The red-clear-red units are suited to the USA Domestic Market ('USDM') and were also used throughout north America in Canada and Mexico.

Sprinters delivered to Europe and Latin America may use either version, depending on country and year.

The pack contains six lenses and two rubbers for the refelctors. Choose from JDM or USDM versions of the tail light lenses by using the drop-down menu.

Complete your 'classic' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your first generation Toyota Corolla Sprinter project in style!

Pair of reproduction B-pillar iconic emblems that tell the world your car is a Sprinter these emblems were fitted to the KE15 or KE17 Toyota Corolla Sprinter variants built from 1967 to 1969.  

These emblems are reproductions are Australian made using the highest quality tooling and are faithful reproductions.

Please note this emblem was not used on the 'SL' variants - please see our separate listing for the SL emblem.

Look great on a vintage restoration project, retro ride, drift mobile or just an every day driver.

Shipping worldwide every week - no problems for international buyers.

All colours available from 1969 to 1971.

Complete your early Toyota restoration project in complete style!

These AMI Lustrelife paint colour decals were fitted in the engine bay of all early model Toyota's built during 1969 to 1971. These were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Our decals are correct in every detail including artwork, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

• Apple
• Bronze Metallic
• Caribbean
• Cirrus Grey
• Columbine Blue
• Cornflower
• Cream
• Deep Russet
• Desert Beige
• Havana Gold
• Hayman Blue
• Marina Turquoise
• Midnight Blue
• Mocca
• Peak White
• Signal Red
• Sirius White
• Targa Pearl Metallic
• White 
• Willow

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

Reproduction front fender side marker lenses in amber for your first generation E10 series Toyota Corolla or Sprinter.

Suited to all Toyota Coroll and Toyota Sprinter late build KE10, KE11, KE17 and KE18 built between 1968 to 1970 these lenses are faithful reproductions made in Australia to the highest quality, replace original Koito part number 252-33159L (left) and 252-33159R (right).

These lenses are fitted to the fender (mud guard) of the sedan, coupe (Sprinter) and wagon variants of the Toyota Corolla.

Available in original amber or custom clear. Select clear or amber lenses from the drop down box.

Also available in clear - please see our separate listing

Complete your 'old school' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Available in USDM and JDM / Rest of World versions. Suits KE16 and KE18 variants built from 1966 to 1970.

The red-amber-clear units are suited to the Japanese Domestic Market ('JDM') and Australian Market which included New Zealand and other South West Pacific nations (eg PNG).

The red-clear-red units are suited to the USA Domestic Market ('USDM') and were also used throughout north America in Canada and Mexico.

Corollas wagons delivered to Europe and Latin America may use either version, depending on country and year.

Complete your early model Corolla wagon project in style - whether its a retro-ride, drift machine, restoration project or street registered!

These lenses have been produced in Australia to highest quality and are faithful reproduction items. It comes in two pieces; One section is the indicator (amber or red) with the stop light (red) and the clear reverse ('back-up') is a separate piece.

Shipping worldwide weekly - no problems for overseas buyers

Reproduction front fender side marker lenses in amber for your first generation E10 series Toyota Corolla or Sprinter. 

Suited to all Toyota Coroll and Toyota Sprinter early build KE10, KE15 and KE16 built between 1966 to 1968 these lenses are faithful reproductions made in Australia to the highest quality, replace original Koito part number L2352 and are available in original amber or custom clear.

These lenses are fitted to the fender (mud guard) of the sedan, coupe (Sprinter) and wagon variants of the Toyota Corolla.

Complete your 'old school' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Also available in clear - please see our separate listing.

Shipping worldwide weekly - no problems for overseas buyers.

Fitted carpet set to suit your first generation Toyota Corolla or Toyota Corolla Sprinter E10 series.

Suited to all Toyota Corolla E10 series built between 1966 to 1970 including KE10, KE11, KE15, KE16, KE17 and KE18 our fitted carpets are well fitting and made in Australia to the highest quality.

Bring back the original factory fit and style of carpet with this fitted carpet set - this is not a moulded carpet!

The set has four carpets that each fit to the floor wells (front and rear) and a piece that is fitted over the transmission tunnel.

Our fitted carpet sets also include the underlay sections, clinch plates and fasteners - there is nothing left to do simply remove your old carpet and install your new carpet set from Toyota Heritage.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

Available in Right Hand Drive (RHD) or Left Hand Drive (LHD) - simply use the drop down menu to select.

Available with or without a heel pad - also use the drop down menus to select.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'first gen' Toyota Corolla project in style - whether its a retro-ride, daily driver or detailed restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Reproduction front fender side marker lenses in amber for your first generation E10 series Toyota Corolla or Sprinter.

Suited to all Toyota Coroll and Toyota Sprinter late build KE10, KE11, KE17 and KE18 built between 1968 to 1970 these lenses are faithful reproductions made in Australia to the highest quality, replace original Koito part number 252-33159L (left) and 252-33159R (right).

These lenses are fitted to the fender (mud guard) of the sedan, coupe (Sprinter) and wagon variants of the Toyota Corolla.

Available in original amber or custom clear. Select clear or amber lenses from the drop down box.

Also available in clear - please see our separate listing

Complete your 'old school' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Faithful reproduction of rubber seals that fits between the rear bumper bar and the licence plate lamp mounting plate on all early model Corolla and Sprinters.

These have been manufactured to the highest tooling and production standards to create a high quality precision faithful reproduction part.

We currently have this same seal fitted to the Toyota Heritage KE17 Race Car. They stop vibration, reduce corrosion and simply finish off your car very nicely.

Suitable for all first generation Corolla and Sprinter - KE10, KE11, KE15, KE16, KE17 and KE18

Reproduction front fender side marker lenses in clear for your first generation E10 series Toyota Corolla or Sprinter. 

Suited to all Toyota Coroll and Toyota Sprinter early build KE10, KE15 and KE16 built between 1966 to 1968 these lenses are faithful reproductions made in Australia to the highest quality, replace original Koito part number L2352 and are available in original amber or custom clear.

These lenses are fitted to the fender (mud guard) of the sedan, coupe (Sprinter) and wagon variants of the Toyota Corolla.

Clear lenses must be used with amber bulbs (supplied).

Complete your 'old school' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Also available in amber - please see our separate listing.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction front indicator and parker light lenses to suit your E10 series (first generation) Toyota Corolla or Sprinter built between 1968 and 1970.

Suited to KE11, KE17 and KE18 Toyota Corolla and Sprinter models these lenses have been made in Australia to the highest quality and replace Koito original part 12-4R (right side) and 12-4L (left side).

Sold as a pair they will complete your first generation E10 series Toyota Corolla or Sprinter project in style - whether its a retro-ride, drift machine, restoration project, street registered or even a race car!

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction tail light lenses for your first generation E10 series Toyota Corolla Sprinter 

Suited to all Toyota Corolla Sprinters KE15, KE15SL, KE17 and KE17SL built between 1968 to 1970 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number 12-9L (left side) and 12-9R (right side)

These lenses were fitted to the rear panel of the coupe Toyota Corolla known as Sprinter and are the same on both the SL and non SL variants.

The red-amber-clear units are suited to the Japanese Domestic Market ('JDM') and Australian Market which included New Zealand and other South West Pacific nations (eg PNG).

Complete your 'classic' Toyota Corolla Sprinter project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Faithful reproduction of rubber seals that fit between the bumper and the steel mounting brackets (rear bumper) on all early model Corolla and Sprinters.

Sold as a pair.

These have been manufactured to the highest tooling and production standards to create a high quality precision faithful reproduction part.

We currently have these seals fitted to the Toyota Heritage KE17 Race Car. They stop vibration, reduce corrosion and simply finish off your car very nicely.

Suitable for all first generation Corolla and Sprinter - KE10, KE11, KE15, KE16, KE17 and KE18

Complete your first generation E10 series Toyota Corolla or Corolla Sprinter in style with an authentic look and feel with this vent operating instructions tag.

These tags were hung on the vent control knob of all Toyota Corolla and Corolla Sprinter models produced from 1966 to 1970 including KE10 KE11 KE15 KE16 KE17 and KE18 whether assembled in Japan, Australia, New Zealand, Canada, Malaysia or Thailand. 

This tag provided the new owner with instructions on how to operate the vent to allow air to flow through the car cabin and were a typical TMC service tag that would be on the car when it was sold new. They instruct the driver of the progressive stage opening of the vent to shift from fresh air to recirculated air.

These tags often lost or completely disintegrated and are no longer available from TMC.

Reproduced meticulously to original detail including print stock, text, punched hole and cord type and thickness. One side instructs in English and the reverse side in original Japanese (just like the originals in the 1960's).

Shipping world wide every week - no problems for international buyers.

Reproduction front parker lenses in amber for your first generation E10 series Corolla or Sprinter.

Suited to all Toyota Corolla and Toyota Sprinter early build KE10, KE11, KE15, KE16, KE17 or KE18 built between 1966 to 1968 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part L2273. 

These lenses were fitted to the front valance panel of the Toyota Corolla and Toyota Sprinter that have front bumpers with a straight bottom edge (no indent to go over the parker lamp).

Complete your 'first gen' Toyota Corolla or Toyota Sprinter project in style - whether its a retro-ride, drift car, street driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction tail light lenses for your first generation E10 series Toyota Corolla Sprinter 

Suited to all Toyota Corolla Sprinters KE15, KE15SL, KE17 and KE17SL built between 1968 to 1970 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number 12-9L (left side) and 12-9R (right side)

These lenses were fitted to the rear panel of the coupe Toyota Corolla known as Sprinter and are the same on both the SL and non SL variants.

The red-clear-red units are suited to the USA Domestic Market ('USDM') and were also used throughout north America in Canada and Mexico. Some early build cars from 1967 in other markets may have also been delivered with this version of the tail lamp lens too.

Sprinters delivered to Europe and Latin America may use either version, depending on country and year.

Complete your 'classic' Toyota Corolla Sprinter project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Faithful reproduction of rubber seals that fit between the bumper and the steel mounting brackets (front bumper) on all early model Corolla and Sprinters.

Sold as a pair.

These have been manufactured to the highest tooling and production standards to create a high quality precision faithful reproduction part.

We currently have these seals fitted to the Toyota Heritage KE17 Race Car. They stop vibration, reduce corrosion and simply finish off your car very nicely.

Suitable for all first generation Corolla and Sprinter - KE10, KE11, KE15, KE16, KE17 and KE18

Complete your first generation Toyota Corolla Sprinter SL project in style!

Pair of reproduction B-pillar iconic emblems that tell the world your car is a Sprinter SL these emblems were fitted to the KE15 or KE17 Toyota Corolla Sprinter SL variants built from 1967 to 1969. 

These emblems are reproductions are Australian made using the highest quality tooling and are faithful reproductions.

Please note this emblem was only used on the 'SL' variants - please see our separate listing for the standard Sprinter emblem.

Look great on a vintage restoration project, retro ride, drift mobile or just an every day driver.

Shipping worldwide every week - no problems for international buyers.