Spare parts suitable for Toyota Corolla and Sprinter E110 Series

NOS and reproduction spare parts suitable for Toyota Corolla E110 series eighth generation models built between 1995 and 2002

Interior Trim Panel Fastener Clip Pack suitable for various Toyota models (TH0362)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 9mm hole and are a plastic push in trim clips used to fasten interior panels such as door cards, trim panels, door pillars, boot linings and pillars.

 Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

  • JZA80

Toyota MR2

  • SW20, SW21
  • ZZW30

Toyota GR Four Yaris 

  • GXPA16

Toyota Corolla

  • AE101, AE102, CE100, EE100, EE101
  • AE110, AE111, AE112, AE114, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE110, ZZE111, ZZE112
  • CDE120, NDE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
  • ZZE130
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
  • NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
  • NRE181, ZRE182 and ZWE182

Toyota Celica

  • ZZT230 and ZZT231

 Toyota Carina

  • ST160, ST162 and ST163

Toyota Corona

  • AT190, CT190, CT195, ST190, ST191, ST195
  • AT210, AT211, CT210, CT211, CT215, CT216, ST210, ST215
  • AT220, CT220 and ST220

Toyota Hilux

  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

  • FZJ71, FZJ76, FZJ78, FZJ79, GRJ71, GRJ76, GRJ78, GRJ79, HDJ79, HZJ71, HZJ76, HZJ78, HZJ79, KZJ77, LJ77, LJ79, RJ77, VDJ76, VDJ78, VDJ79
  • FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105, UZJ100
  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121, VZJ125
    GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota Soarer

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Bonnet Hood Insulation Clip Pack suitable for various Toyota models (TH0500)

Toyota bonnet (hood) insulation clip pack to suit various Toyota models - Celica, Corolla, Hilux, Surf, Prado, Soarer and Supra

These clips have a 24.5mm head are used with a 7mm hole and are plastic push in trim clips used to fasten the under bonnet (hood) insulation sheet. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • ZZT230 and ZZT231

Toyota Supra

  • JZA80

Toyota Corolla

  • AE101, CE101, CE102, CE105, CE107
  • AE111, AE115, CDE110, CE113, CE116, WZE110, ZZE11, ZZE112
  • CDE120, NDE120, ZRE120, ZZE120, ZZE121 and ZZE122

Toyota Hilux / Surf

  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Prado

  • GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121 and VZJ125

 Toyota Soarer

  • JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Scuff Plate Door Moulding and Flare Clip Pack suitable for various Toyota models (TH0363)

Toyota screw mounting grommet clip pack to suit various Toyota models - Celica, Corolla, Carina, Caldina, Land Cruiser, Prado, Hilux, Surf and  Soarer

These clips have a 12.8m top head diameter on a 17.5mm head diameter, 12mm fitted length and fit to a 8.5mm hole are a plastic push in trim clip used to fasten door scuff plates, door opening trim moulding, carpet edges, exterior door moulds and flares, plastic panels on top of front guards under bonnet, mudguards, spoilers, boot trays

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205
  • ZZT230 and ZZT231

Toyota Corolla

  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
  • CDE120, NDE120, NZE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
  • ZZE130
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153 and ZZE150

Toyota Carina

  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT211, CT216, ST210 and ST215

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • GRN280, GRN285, TRN280 and TRN285

Toyota Soarer

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Bonnet (Hood) Weather Strip Clips Pack suitable for various Toyota models (TH0391)

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • All models from KE30 through to ZWE182

 Toyota Corona

  • All models from ST140 through to ST215

Toyota Cressida

  • All models from MX32 through to RX81

Toyota Hilux and Surf

  • All models from LN130 through to VZN185

Toyota Land Cruiser

  • All models from BJ60 through HZJ105

Toyota MR2

  • AW10 andAW11
  • ZZW30

 Toyota Supra

  • GA70, JZA70 and MA70
  • JZA80

Toyota Starlet

  • KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Push Fit Plastic Rivet Clip 6.5mm suitable for various Toyota models (TH0372)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser and  MR2.

These clips have a 15mm head diameter, 12mm fitted length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • AW11L
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
  • AE101, AE102, CE100, EE100, EE101
  • WZE110, ZZE111 and ZZE112

Toyota Carina

  • ST170G
  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • FJ62, FJ62G, FJ62V, BJ60, BJ61, FJ60, HJ60 and HJ61

Toyota Hilux and Surf

  • LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, YN90, YN92
  • LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
  • LN110, LN112, RN110, YN110
  • RN125
  • KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
  • KDN150, LN152, LN155, RZN152, RZN154
  • KDN165, KZN165, RZN168, RZN169, VZN167
  • KDN170, LN171, LN172, RZN174, VZN172
  • KDN190, LN191, RZN193
  • LN200, RZN200
  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • ST171, CT176, ET176, ST171
  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

Long Wheel Stud Kit suitable for Toyota Four Stud Hub

Suited to Toyota vehicles using four OEM wheel studs per hub.

Ensure good engineering practice with wheel studs that provide for proper engagement of wheel nuts with these longer than standard M12 1.5 pitch 72mm wheel studs.

Good engineering (safety) practice requires wheel nut engagement of the wheel stud to be the equivalent of the wheel stud diameter - 12mm for all Toyota models.

On a 1.5 pitch this means that your wheel nut must get at least 8 turns to ensure a safe and proper engagement.

Please check with us prior to purchase (This email address is being protected from spambots. You need JavaScript enabled to view it.) if your vehicle has been fitted with aftermarket hubs.

Toyota Heritage's long wheel stud kits provide enough length for proper engagement. Our open ended wheel nuts mean that they may also be used with a wide range of aftermarket and factory mag wheels.

Toyota Heritage offers four different wheel stud kits:

  • Kit 1 - Wheel studs only
  • Kit 2 - Wheel studs with wheel nuts suited to factory mag wheels
  • Kit 3 - Wheel studs with wheel nuts suited to after market mag wheels
  • Kit 4 - Wheel studs with wheel nuts suited to factory and after market mag wheels

Application:

Kit 1 (Stud Pack)

  • 16 pieces (wheel studs) in the kit
  • Perfect for when you have purchased after market mag wheels but you are not getting 8 turns of the wheel nuts the vendor supplied

Kit 2 (Factory Pack)

  • 32 pieces in the kit including studs and open-end flat seat wheel nuts with captive washers
  • Perfect for use with factory mag weels and using a wheel spacer up to 30mm to create offset to suit your handling set-up

Kit 3 (Aftermarket Pack)

  • 32 pieces in the kit including studs and open-end tapered seat wheel nuts
  • Perfect for use with almost any aftermarket mag wheel requiring a tapered seat wheel nut

Kit 4 (Track Pack)

  • 48 pieces in the kit including studs and open-end tapered seat wheel nuts plus open-end flat seat wheel nuts with captive washers
  • Perfect for the person who wants to run factory mag wheels around the streets and then switch to their track day wheels and tyres at the track

 

 

$93.60
* Pack Type:

Floor Mat Set suitable for Toyota Corolla E110 Series RHD

Floor mat set for the passenger area of your right hand drive eighth generation E110 series Toyota Corolla.

Suited to all five door lift back and four door RHD Toyota Corolla E110 series built between 1995 to 2002 including AE110, CE110, EE110 and ZZE110 our carpet floor mats are well fitting and made in Australia to the highest quality with a non-slip foam backing. 

These mats are styled from original OEM mats and are available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

Available in six different edge binding colours - please use the third drop down menu to select the colour of your choice.

Displayed here in Ice Blue (formerly Kingfisher) with grey edge binding and in loop pile this combination has a real OEM look and feel.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'eighth gen' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$150.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Interior Door Card Clip Pack suitable for various Toyota models (TH0505)

Toyota interior door card clip pack to suit various Toyota models - MR2, Corolla, Carina, Caldina, Land Cruiser, Prado, Hilux, Surf and Starlet.

These clips have a 13.3mm top head diameter on a 16.3mm head diameter, 13.3mm stem length and fit to a 8.5mm hole and are a plastic push in trim clip used to fasten 

door card and trim panel clips.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

Toyota Corolla

  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112

Toyota Carina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 ST210 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210 and ST215

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • GKDN165, KDN166 and KDN190

Toyota Starlet

  • EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Scrivet Clip 7mm suitable for various Toyota models (TH0388)

Toyota scrivet mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 14mm collar diameter, 8mm stem grip length and fit to a 7mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

Toyota Celica 

  • ZZT230 and ZZT231

Toyota Corolla

  • AE101, AE102, CE100, EE100, EE101
  • ZZE110, WZE110, ZZE111 and ZZE112

Toyota Carina

  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Corona

  • AT210, AT211, CT211, CT216, ST210 and ST215

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Inner Guard (Fender) Fastener Clip Pack suitable for various Toyota models (TH0385)

Inner guard (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Camry, MR2, Carina, Caldina

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

 Toyota MR2

  • AW10 and AW11
  • SW20 and SW21
  • ZZW30

Toyota GR Four Yaris

  • GXPA16

Toyota Corolla

  • AE81, AE82, AE85 and AE86
  • AE90, AE92, AE93, AE94, AE95 and AE96
  • AE101, AE102 and AE112 

 Toyota Camry

  • SV10, SV11, SV12, CV10 and CV11
  • SV20, SV21 and SV22

Toyota Caldina 

  • ST191, ST195 and ST198

 Toyota Carina

  • TA40, TA41, TA42, TA47, TA57, RA40, RA45, RA46, RA55 and RA56
  • AA60, KA67V, AA63, TA60, TA61, TA67V, TA62, TA63, RA63, CA60 and CA67V
  • ST162
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V
  • AT192, AT190, AT191, ST190, ST195, CT190 and CT195
  • AAT212, AT210, AT211, ST210, ST215, CT210, CT215, CT211 and CT216

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$25.00
* Pack size:

Door Card Side Trim Panel and Fascia Clips Pack suitable for various Toyota models (TH0379)

Door card, side trim panel and fascia fastener clip pack to suit various Toyota models - Caldina, Celica, Corolla, Corona, Supra, MR2, Soarer, Prado, Yaris, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door as well as other interior trim and fascia panels.

These are a push in clip that have a fit to a 9mm hole size and measure 12.8mm ( top head diameter), 15.6mm (centre head diameter) , 17.7mm (bottom head diameter) with a stem length of 14.2mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, CT216, ET196, ST190, ST191, ST195, ST198
  • AT211, ST210, ST215

 Toyota Celica 

  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE91, AE92, AE95, CE90, EE90
  • AE100, AE101, AE102, AE103, AE104, CE100, CE101, CE104, EE100, EE101
  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
  • CDE120, ZRE120, ZZE120, ZZE121, ZZE122 and ZZE123

 Toyota Corona

  • YT140

 Toyota Hilux

  • KDN145, LN140, LN141, LN145, LN147, RZN142, RZN144, RZN147, RZN148, RZN149
  • KDN150, KDN151, LN150, LN152,
  • KDN165, KDN166, KZN165, LN166, LN167
  • KDN170, LN170, LN171, LN172, RZN173, RZN174, VZN172
  • KDN190, KZN190, LN192 and RZN194

  Toyota Supra

  • MA61, MA63

Toyota Land Cruiser 

  • BJ60, FJ62, HJ60
  • BJ73, FJ70, FJ73, FJ75, FZJ70, FZJ71, FZJ73, FZJ74, FZJ75, FZJ78, FZJ79, HDJ78, HDJ79, HJ75, HZJ70, HZJ71, HZJ73, HZJ74, HZJ75, HZJ76, HZJ77, HZJ78, HZJ79, KZJ70, KZJ71, KZJ73, KZJ77, KZJ78, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ75, PZJ77, RJ70, RJ73, RJ77
  • FJ80, FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota MR2 

  • SW20 and SW21

Toyota Soarer

  • JZZ30, UZZ30, UZZ31 and UZZ32

Toyota Supra

  • JZA80

Toyota Yaris 

  • NCP10, NCP11, NCP12, NCP13, NLP10, SCP10
  • NCP20
  • EP80, EP81, EP82, EP85, NP80
  • EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Engine Bay Inner Guard Bumper Bar Clip Pack suitable for various Toyota models (TH0333)

Toyota push mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 18mm head diameter, 9mm stem length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • ZZW30

Toyota Celica 

  • ZZT230 and ZZT231

Toyota GR Four Yaris

  • GXPA16

Toyota Corolla

  • AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
  • AE101, AE102, CE100, EE100, EE101
  • ZZE110, WZE110, ZZE111 and ZZE112
  • NZE120, NZE141, ZZE120, ZZE121, ZZE122, ZZE123, CDE120, NDE120, NZE120, ZRE120
  • ZZE130
  • ZRE142, ZRE143, ZZE141, ZZE142, AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182

Toyota Carina

  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Hilux and Surf

  • LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, YN90, YN92
  • LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
  • LN110, LN112, RN110, YN110
  • RN125
  • KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
  • KDN150, LN152, LN155, RZN152, RZN154
  • KDN165, KZN165, RZN168, RZN169, VZN167
  • KDN170, LN171, LN172, RZN174, VZN172
  • KDN190, LN191, RZN193
  • LN200, RZN200
  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP90, EP91, EP95 and NP90

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size: