Exterior Moulding or Vent Clip Pack suitable for various Toyota models (TH0497)

Toyota exterior moulding clip pack to suit various Toyota models - Corolla, Carina, Corona, Hilux, Surf, Land Cruiser, MR2, Starlet and Supra

These clips have a 7mm square head and rubber washer and are plastic push in trim clips used to fasten side mouldings, vents, grillesand various other exterior trim items.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

  • GA70, JZA70 and MA70

Toyota MR2

  • ZZW30

Toyota Corolla

  • AE80, AE81, AE82, CE80, EE80
  • AE91, AE92, CE90, CE96, CE97, EE90, EE96, EE97, EE98
  • AE100, AE101, AE102, CE100, CE106, CE108, CE109, EE100, EE101, EE105, EE106, EE107 and EE108

Toyota Carina

  • TA60, TA62, CA60, SA60
  • AT170, AT171, CT170, CT176, ET176, ST170 and ST171

Toyota Corona 

  • CT147, KT147, TT147, YT140
  • AT177, CT176, CT177, ET176 and ST171

Toyota Starlet

  • EP70, EP71, EP76, NP70 and NP76

 Toyota Hilux / Surf

  • KDN185, KZN185, RZN180, RZN185 and VZN185

Toyota Land Cruiser

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

 Toyota Soarer

  • JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Push Fit Plastic Rivet Clip 8mm suitable for various Toyota models (TH0005 33A)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina and  MR2.

These clips have a 16mm head diameter, 11mm fitted length and fit to a 8mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Available in Black or Grey - use the second drop down menu to select.

Suits the following models:

Toyota MR2

  • AW11
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L
  • CDE120, NDE120, ZZE120 and ZZE121

Toyota Carina

  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • BJ60, BJ61, FJ60, FJ62, HJ60 and HJ61

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

* Product Colour:

Push Fit Plastic Rivet Clip 6.5mm suitable for various Toyota models (TH0372)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser and  MR2.

These clips have a 15mm head diameter, 12mm fitted length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • AW11L
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
  • AE101, AE102, CE100, EE100, EE101
  • WZE110, ZZE111 and ZZE112

Toyota Carina

  • ST170G
  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • FJ62, FJ62G, FJ62V, BJ60, BJ61, FJ60, HJ60 and HJ61

Toyota Hilux and Surf

  • LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, YN90, YN92
  • LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
  • LN110, LN112, RN110, YN110
  • RN125
  • KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
  • KDN150, LN152, LN155, RZN152, RZN154
  • KDN165, KZN165, RZN168, RZN169, VZN167
  • KDN170, LN171, LN172, RZN174, VZN172
  • KDN190, LN191, RZN193
  • LN200, RZN200
  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • ST171, CT176, ET176, ST171
  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Interior Door Card Clip Pack suitable for various Toyota models (TH0505)

Toyota interior door card clip pack to suit various Toyota models - MR2, Corolla, Carina, Caldina, Land Cruiser, Prado, Hilux, Surf and Starlet.

These clips have a 13.3mm top head diameter on a 16.3mm head diameter, 13.3mm stem length and fit to a 8.5mm hole and are a plastic push in trim clip used to fasten 

door card and trim panel clips.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

Toyota Corolla

  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112

Toyota Carina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 ST210 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210 and ST215

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • GKDN165, KDN166 and KDN190

Toyota Starlet

  • EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

10mm Interior Clip Pack suitable for various Toyota models (0335)

Toyota scrivet mounting clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina, Hilux, Soarer and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 11mm stem length and fit to a 10mm hole are a plastic push in trim clips used to fasten door trim cards, boot lining panels, console trims, rear door trims, tailgate trims, pillar trim, roof lining edge trims.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE91, AE92, AE95, CE90 and EE90

Toyota Caldina

  • AT191, CT190, ST190, ST191 and ST195

Toyota Carina

  • AT190, AT191, CT190 and ST191

Toyota Corona

  • ST191

Toyota Hilux

  • LN50, LN51, LN55, LN56, RN55, YN51, YN56
  • LN60, LN61, LN65, RN61, RN66, YN60, YN61G, YN61V, YN65
  • LN80, LN81, LN85, LN86, RN80, RN85, VZN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, VZN90, VZN95, YN90, YN92
  • LN100, LN105, LN106, LN107, RN101, RN105, RN106, VZN100, VZN105, YN100, YN106
  • LN110, LN111, RN110, VZN110, YN110
  • LN200, LN205 and RZN200

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Door Card Interior Trim 8.5mm Clip Pack suitable for various Toyota models (TH0378)

Toyota door card interior trim clip pack to suit various Toyota models - Corolla, Carina, Corona, Cressida, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 8.5mm hole are a plastic push in trim clips used to fasten door cards, trim panels, door pillars, boot linings and pillars etc.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE101
  • AE91, AE92, AE95, CE90, CE96, CE97, EE90, EE96, EE97 and EE98

Toyota Carina

  • AT171, CT170, CT176, ET176, ST171
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Corona

  • AT170, AT171, AT175, CT170, ST170, ST171
  • AT210, AT211, AT220, CT210, CT211, CT215, CT216, CT220, ST210, ST215 and ST220

Toyota Cressida

  • GX81, LX80, MX81, MX83, RX80 and RX81

Toyota Land Cruiser 

  • BJ73, FJ70, FJ73, HZJ70, HZJ73, HZJ77, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ77, RJ70, RJ73, RJ77
  • FJ80, FZJ80, HDJ80, HDJ81, HZJ80 and HZJ81

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Screw Mounting Grommet Clip Pack suitable for various Toyota models (TH0456)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 16mm collar diameter, 18mm stem length and fit to a 10mm x 10mm square hole and are a plastic push in trim clips used to fasten bumper bars, wheel arches, splashguards, sill panels, mud flaps, fuel tanks and fuel pipes.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE95
  • AE100, AE101, AE102, AE104, CE100, CE104, EE100 and EE101

Toyota Celica

  • AT160, ST160, ST161, ST162, ST163, ST165 and ST182

 Toyota Carina

  • ST160, ST162 and ST163

Toyota Corona

  • AT150, AT151, CT150, ST150, ST151
  • ST160 and ST162

Toyota Hilux

  • RN120, RN121, VZN120, VZN130, VZN131
  • KZN130, LN130, LN135, RN130, RN131, RN135, YN130, YN135
  • KDN185, KZN185, RZN180, RZN185, VZN180, VZN185
  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

  • KDJ90, KDJ95,KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Screw Mounting Grommet Clip Pack suitable for various Toyota models (TH0369)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina and  MR2.

These clips have a 20mm head diameter, 23mm length and fit to a 8mm square hole are a plastic push in trim clips used to fasten bumper covers, inner wheel arches, splashguards, sill panels and mud-flaps.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • ZZW30

Toyota Corolla

  • CDE120, NDE120, ZZE120 and ZZE121

Toyota Carina

  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT24, AZT246, ST246 and ZZT241

 Toyota Corona 

  • AT190, CT190, CT195, ST190, ST191, ST195
  • AT210, AT211, CT210, CT211, CT215, CT216, ST210, ST215
  • AT220, CT220 and ST220

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size: