Genuine Eagle brand 8mm ignition leads to suit your Toyota Celica, Toyota Corona or Toyota Carina fitted with an 18RG engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 2TG engines.

Suits 2.0L 2TG DOHC GT1600 (Celica and Carina) and Levin or Trueno (Corolla) models as follows:

• Celica - TA23, TA27, TA28, TA40, TA45, TA60 and TA61
• Carina - TA12, TA17, TA40, TA45 and TA60 
• Corolla - TE21, TE27, TE28, TE37, TE51 and TE71 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 9mm ignition leads to suit your Toyota Celica XX, Toyota Celica Supra, Toyota Cressida or Toyota Crown fitted with a 5ME engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 5ME engines.

Suits 2.8L 5ME SOHC Celica XX , Celica Supra, Cressida and Crown models as follows:

• MA47 - Celica XX
• MA56 - Celica XX and Celica Supra
• MA61 - Celica Supra
• MX62 - Cressida
• MX73 - Cressida
• MS112 and MS123 - Crown

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Front and rear floor carpet set for your first generation Toyota Celica A20.

Suited to all RHD Toyota Celica built between 1971 to 1977 our carpet floor mats are patterned off the OEM factory original mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats included in this set.

Displayed here in Ginger ('Appino Brown') loop pile with a brown edge binding, these mats provide a look that has an OEM look and period correct feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'first gen' Toyota Celica project in style - whether its a daily driver, resto-mod or detailed restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Edge binding colours Edge binding colours
• 
•  

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Complete your early Toyota restoration project in style with a reproduction 1HZ engine build plate for your Toyota Land Cruiser or Toyota Coaster.

These '1HZ' engine Build Plates were fitted in the engine bay of Toyota Landcruiser J80 and J100 series built from 1990 to 2007 and B30, B40 and B50 series Toyota Coaster from 1990 to 2012. 

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

Select H or 2H engine or HJ45 build plate using the drop down menu.

We ship globally to all countries weekly.

• 2H Engine build plate 2H Engine build plate
• HJ45 build plate HJ45 build plate
• H Engine build plate H Engine build plate
•  

Frunk clip and bungey cord for your third generation Toyota MR2 W30 series .

Suited to all Toyota MR2 ZZW30 also known as a Toyota MRS, Toyota MR2 Roadster and Toyota MR Roadster built between 1999 to 2007 our frunk clip comes complete with bungey cord, is stronger than OEM factory originals and is made in Australia to the highest quality.

A small but very functional part, this clip holds the frunk spare wheel cover up whilst the front hood is open - just the thing needed if you're changing a tyre (especially in the wind, rain or snow). Why perservere with a broken clip when you can now simply replace it with this reproductin by Toyota Heritage.

Complete your 'third gen' Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

Front and rear floor carpet set for your second generation Toyota Celica or first generation Toyota Supra A40 and A50 series.

Suited to all RHD Toyota Celica and Toyorta Supra built between 1977 to 1981 our carpet floor mats are patterned off the OEM factory original mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

These mats will fit the following models:

Toyota Celica

• TA40, TA41, TA42, TA45, TA46, TA47
• RA40, RA42, RA43, RA45, RA46 and RA55

Toyota Supra (also known as Celica Supra and Celica XX)

• MA45, MA46, MA47, MA55 and MA56

There are five mats included in the set and this includes the two front foot well mats, two rear floor well mats and a mat that sits over the transmission tunnel in front of rear seat.

Displayed here in Spindrift loop pile with a grey edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'second gen' Toyota Celica or first generation Toyota Supra project in style - whether its a daily driver, offroader or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Edge binding colours Edge binding colours
• 
•  

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Reproduction pair of amber or custom clear or smoke side marker indicator lenses for your third generation Toyota Supra A70 series.

Suited to all Toyota Supra A70 series built between 1986 to 1993 these lenses are wonderful in original amber or custom clear or smoke reproductions made to the highest quality and replace original part 20-149.

These lenses are fitted to the front mudguard (fender) of the MA70, GA70 and JZA70 Toyota Supra and replace the traditionally amber lenses. Clear and smoke lense must be used with an amber bulb. Vendor does not warrant regulatory compliance.

Complete your 'third gen' Toyota Supra project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

UK and Europe customers please contact Toyota Heritage prior to ordering.

Shipping worldwide weekly - no problems for overseas buyers.

• Amber lenses Amber lenses
• Clear lenses Clear lenses
• Smoke lenses Smoke lenses
•  

Genuine Eagle brand 7mm ignition leads to suit your SW20 Toyota MR2 built from 1989 to November 1991

Our photo shows each of the boot and tube assemblies specific to this kit that suits the SW20 MR2.

Suits 2.0L 3S-GE DOHC 16V Fuel Injection non-turbo models of the SW20 Toyota MR2 referred to as Rev 1.

NOTE: for SW20 built after November 1991 please see separate listing for product TH54631

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.