Genuine Eagle brand 7mm ignition leads to suit your SW20 Toyota MR2 built from 1989 to November 1991

Our photo shows each of the boot and tube assemblies specific to this kit that suits the SW20 MR2 Turbo.

Suits 2.0L 3S-GTE DOHC 16V Fuel Injection Turbo models of the SW20 Toyota MR2 Turbo referred to as Rev 1 Turbo, MR2 GT or MR2 GT-S.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 7mm ignition leads to suit your ST182 or ST183 Toyota Celica built from 1989 to 1993.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the  ST182 and ST183 Toyota Celica

Suits 2.0L 3S-GE DOHC 16V Fuel Injection models of the ST182 Toyota Celica GT-R, GT-i and GTS-i 16 and ST183 Toyota Celica 4WS GT-R, Active Sports, 4WS convertible and 4WS convertible Type G.

NOTE: these models were not delivered to the Australian market but you may own a private import. These models were mostly delivered domestically in Japan plus other foreign markets such as New Zealand, Belgium and the Middle East. 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 7mm ignition leads to suit your SV21 Toyota Camry.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the SV21 Toyota Camry.

Suits 2.0L 3S-GE DOHC 16V Fuel Injection models of the SV21 Toyota Camry.

NOTE: these models were not delivered to the Australian market but you may own a private import. These models were mostly delivered domestically in Japan plus other foreign markets such as New Zealand, Belgium and the Middle East. 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Three piece passenger cabin carpet floor mat for your Toyota Yaris GRFour. 

Suited specifically to the Toyota Yaris GRFour GXPA16 (aka a GRFour Yaris) this floor mat set is fitted to the front two foot wells and the third piece (rear) spans across the rear passenger floor and covers the drive shaft tunnel. These mats are made in Australia to the highest quality.

Available in four different colours and in either loop or plush pile this mat set can be purchased to match any previous carpet cargo area mat from Toyota Heritage. Simply use the drop down boxes to select your required carpet colour, binding colour and pile type (loop or plush). 

Complete your Toyota Yaris GRFour in style with this floor mat set from Toyota Heritage.

Shipping worldwide weekly - no problems for overseas buyers.

• Black Black
• Charcoal Charcoal
• Red Red
• Slate Slate
•  

• Edge binding colours Edge binding colours
• 
•  

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla Caldina, Soarer and GR4 Yaris

These clips have a fit to a 6.4 mm hole, head diameter of 16 mm and a total stem length of 16mm with a stem grip depth of 10mm are a plastic push in clip used to fasten interior panels, inner fenders and other trim panels.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Corolla

• ZRE120
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142 (back door panel)
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Caldina 

• AZT241, AZT246, ST246 and ZZT241

Toyota GR4 Yaris (inner fender)

• GXPA16 and MXPA12

Toyota Soarer (back trim panel)

• Z40 

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota screw mounting grommet clip pack to suit various Toyota models - Aurion, Hilux, Surf, Yaris and GR4 Yaris

These clips have a fit to a 9mm square hole, with a 18mm stem and a 20mm collar are a plastic push in grommet used to fasten bumper covers, side members, hood (bonnet) linings and other plastic to metal body applications.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry (side member)

• ACV40, ACV41, AHV40, GSV40
• ACV51, ASV50, ASV51 and AVV50

 Toyota Hilux (front bumper, inner fender, bonnet / hood, air injection pump)

• GUN112, KUN112, TGN110, TGN111
• GGN120, GGN125, GUN122, GUN123, GUN125, GUN126, KUN122, KUN125, KUN126, LAN125, TGN120, TGN121, TGN126, TGN128
• GGN135, GUN135, GUN136, KUN135, KUN136, TGN136, TGN138 

Toyota GR4 Yaris (inner fender)

• GXPA16 and MXPA12

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

• CV10, CV11, SV10, SV11, SV12
• MCV20, MCV21, SXV20, SXV23, SXV25
• MCV36, ACV36
• ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

• TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
• AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
• AT160, ST160, ST161, ST162, ST163, ST165
• AT180, ST182, ST183, ST184, ST185
• AT200, ST202, ST203, ST204, ST205
• ZZT230 and ZZT231 

Toyota Corona

• RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
• RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
• AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
• T160, T170, T190 series
• T200, T210, T220 series

Toyota Cressida

• RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
• X60, X70 and X80 series

Toyota Carina

• A10, A40, A60 series
• T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

• KE30, KE35, KE38, KE55, TE55, TE37
• KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
•  AE80, EE80, AE81 AE85, AE82, AE86, CE80
• AE90, AE92, AE93, AE94, AE95, AE96
• AE101, AE111, AE112
• ZRE120
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

• RN10, RN15
• RN20, RN25
• RN30, RN35, RN40, RN45
• RN50, RN60, YN60, LN60, RN70, YN70, LN70
• N80, N90, N100, N110 series
• N120 series
• N130 series
• N140 series

Toyota Land Cruiser 

• FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
• FJ55, FJ55G, FJ55V, FJ56
• FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
• FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
• HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

• J90, J120 and J150 series

Toyota Starlet

• KP60, KP61, KP62
• P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota door card clip pack to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado and GR4 Yaris

These clips have a fit to a 9mm hole size, have a 12mm top head, 17mm centre head and a 18mm lower head  are a plastic push in clip used to fasten interior panels and door trims and other trim panels.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

• MCV20, MCV21, SXV20, SXV23, SXV25
• MCV36, ACV36
• ACV40, ACV41, ACV45, AHV40, AHV41, ASV40, GSV40
• ACV51, ASV50, ASV51, AVV50 and GSV50

Toyota Celica (door panel triangle)

• ZZT230 and ZZT231 

 Toyota Corolla

• AE101, AE111, AE112
• ZRE120
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142 (back door panel)
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux

• GGN120, GGN125, GUN122, GUN123, GUN125, GUN126, KUN122, KUN125, KUN126, TGN120, TGN121, TGN126
• GUN135, GUN136, KUN135, KUN136 and TGN136

Toyota Land Cruiser 

• VDJ79
• GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

• GRJ120, GRJ125, KDJ120, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125
• GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota GR4 Yaris

• GXPA16 and MXPA12

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.